Mould geode serving tray
- Mould for serving trays
- Dimensions: 31 x 18 cm
- Material: silicone
With this mould for a serving tray you can make the most beautiful geode trays for yourself or others! The mould is made of silicone so the epoxy will not stick to the mould and can be released easily. This mould can be reused.
This resin art mould is supplied without handles. You can easily order the corresponding handles and screws. The handles are easy to assemble after the epoxy has hardened. To do this, drill a hole in the epoxy. This way you make the tray complete for use!
Suitable epoxy resin
Using suitable epoxy is important for the end result of your Resin Art creations. Want to use a transparent epoxy that is ideally suited for Resin Art? Then choose, for example, RESION UV Resin Art epoxy LV (low viscosity). This epoxy resin is highly UV-resistant and easy to use due to its 2:1 mixing ratio. For all epoxy resins, see the Epoxy category.
Use UltraCast epoxy resin to increase the heat resistance of the tray (up to 75°C). This will reduce the risk of rings caused by hot crockery.
Make a unique serving tray with these pigments
With pigments you can make your own epoxy tray, completely according to your wishes. For example, give the epoxy a beautiful and luxurious metallic look with MetalTint, available in more than 30 colours. Or do you prefer a transparent colour? Then use TransTint pigment. View our entire pigment range to see which pigments suit your taste!
Shape: serving tray
Dimensions: 31 x 18 cm
You will need approximately 350 grams of epoxy for this mould.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.