- Heart-shaped box
- Box comes with a lid
- Material: silicone
With this mould, you can easily make your own heart-shaped epoxy storage box. The mould consists of 2 parts: the heart-shaped box and the lid. The box and the lid fit well together. The mould is made of flexible silicone, so the epoxy does not adhere to the mould. The mould is easy to release and can be used several times.
Suitable epoxy resin
Using suitable epoxy is important for the end result of your Resin Art. Want to use a transparent epoxy that is ideally suited for Resin Art? Then choose for example, RESION UV Resin Art epoxy LV (low viscosity) or RESION UV Resin Art epoxy MV (medium viscosity). Both resins are highly UV resistant and easy to use with a 2:1 mix ratio. For all epoxy resins, see the Epoxy category.
Make a unique storage box with these pigments
You can use pigments to make the boxes just the way you want them. For example, give the epoxy a beautiful and luxurious metallic look with MetalTint, available in more than 20 colours. Or would you prefer a transparent colour? Then you can use TransTint pigment. For an opaque colour please use our Resi-Tint MAX pigment paste.
View our entire pigment range to see which pigments suit your taste!
Size: 8 x 8 cm (lxw)
You will need approximately 150 grams of epoxy for this mould.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.