- Make your own coasters!
- Material: silicone
- Dimensions: 10 x 10 cm
Make your own coasters? You can do so very easily with these moulds made of silicone! This coaster mould is available in three different shapes. The mould is easy to release after curing, so you can use this mould several times. The coasters can be ordered separately or in an inexpensive set of four (3+1 free)!
Epoxy coaster kit
With this complete coaster kit, you have everything you need to make your own coasters. The kit includes epoxy resin, pigments and a three part coaster mould, in short, everything you need to get started quickly!
Suitable epoxy resin
Using suitable epoxy is important for the end result of your Resin Art. Do you want to use epoxy that is highly resistant to UV radiation and very easy to process? RESION UV Resin Art epoxy LV (low viscosity) or RESION UV Resin Art epoxy MV (medium viscosity). Because this epoxy does not discolour under UV light, you do not need a stabiliser. View all epoxy resins in the category Epoxy.
Use UltraCast epoxy resin to increase the heat resistance of coasters (up to 75°C). This way, you reduce the risk of circles on your coasters!
Shapes: square, round and hexagonal
Set: set of 4 identical coasters
The coasters have a small raised edge so your glass won't slide off the coaster!
- Approx. 10 cm x 10 cm for the square mould
- Approx. 10 cm x 10 cm for the hexagonal mould
- Approx. 8 cm x 8 cm for the round mould
- Height: 1.5 cm
- Approx. 125 grams of epoxy needed for the coasters
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.