- Serving tray with edge
- Diameter: 25 cm
- Contents: 185 grams
Make your own epoxy tray with this silicone mould. Use this mould to make a tray with a rim so the glasses do not slide off the tray. The mould has a round shape and is made of flexible silicone. As a result, the epoxy does not adhere to the mould and the end result can easily be removed from the mould. You can then simply use the mould again for your next serving tray.
Suitable epoxy resin
Using suitable epoxy is important for the final result of your epoxy tray. Would you like to use a transparent epoxy that is extremely suitable for Resin Art? Then choose, for example, RESION UV Resin Art epoxy LV (low viscosity). This epoxy resin is highly UV-resistant and easy to use due to its 2:1 mixing ratio. For all epoxy resins, see the Epoxy category.
Make your tray unique with these pigments
Pigments allow you to create a tray in your favourite colours. For example, give the epoxy a beautiful and luxurious metallic look with MetalTint, available in more than 30 colours. Or do you prefer an opaque colour? Then use Resi-Tint MAX. Check out our entire pigment range to see which pigments suit your taste!
Diameter: 25 cm
You will need approximately 285 grams of epoxy for this mould.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.