- Create your own serving board
- Contents: 300 ml
- Dimensions: 33 x 13 cm
With this silicone mould, you can make your own epoxy serving boards! Make a real eye-catcher to serve your snacks on or to give as a gift. The mould for a small serving board is made of flexible silicone. This prevents the epoxy from sticking to the mould and allows you to use the mould several times.
Suitable epoxy resin
Using suitable epoxy is important for the end result of your epoxy serving board. Want to use a transparent epoxy that is ideally suited for Resin Art? Then choose RESION UV Resin Art epoxy LV (low viscosity). This epoxy resin is highly UV resistant and easy to use thanks to its 2:1 mixing ratio. For all epoxy resins, see the Epoxy category. Do not forget to finish your étagère with food-safe epoxy if you use the board to put unpackaged food on.
Make a unique serving board with these pigments
With pigments, you can customise your epoxy serving board. For example, give the epoxy a beautiful and luxurious metallic look with MetalTint, available in more than 30 colours. Or do you prefer a transparent colour? Then you can use TransTint pigments. For an opaque colour, we recommend using Resi-Tint MAX. Check out our entire pigment range to see which pigments match your creative ideas!
Dimensions: 33 x 13 x 1.5 cm (lxwxd)
This mould holds approximately 300 grams of epoxy.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.