Posca PC-3M (set of 8)

Set of 8 Posca markers in cool colours! The paint pens are ideal for finishing your Resin Art coasters, etagères, paintings or similar applications. The marker has a fine tip, allowing you to work very precisely and in great detail. The pigment-based ink is water-based and is odourless to use.

Posca PC-3M

The paint marker is equipped with a fine conical PC-3M tip. This means that the diameter of the tip gradually increases (conical). The conical tip makes this marker universally usable and is especially suitable for small surfaces. This is because the 3M posca marker has a line width of 0.9 - 1.3 millimetres. So you can work very precisely and in detail on your painting, coaster or other application!

You can use the Posca paint markers using the following steps:

Step 1: shake the marker
Shake the marker firmly upside down with the cap closed so that the ball can make the colour homogeneous. While shaking, you will hear that typical 'click'.

Step 2: using and testing the marker
Start by pressing the Posca marker several times with the tip on a sheet of paper until the tip is sufficiently soaked with paint. Test the coverage on a scrap sheet of paper: if the line is tight, the marker is ready. It can be useful to always have a rag handy to easily clean the tip or absorb excess paint.

Step 3: shake again
If the coverage decreases while designing, shake the marker again. When doing this, make sure the cap is always on the marker to avoid paint splashes. You can then continue using the marker.

Step 4: cleaning
If necessary, you can clean the tip with water as often as you like. If the tip has become extremely dry, you can also soak it in water overnight.

Step 5: storage
Close the cap of the Posca well. Store the Posca marker preferably horizontally.

Product properties

Model: PC-3M
Point: conical
Line thickness: 0.9-1.3 mm (fine)
Material: plastic
Quantity: 8 markers
Colours: