Enkachannel 100 mm
At a glance
- Good resin flow
- No imprint in the laminate
- In various sizes
Enka-Channel 100 mm is a feeder channel that transports resin very well. Due to its flat structure, this resin feeder does not leave any imprints in the laminate. The channel is easy to cut to size and secure to the infusion mesh.
Enka-Channel is used for resin infusion. Examples of applications include boats, wind turbine blades, scooter body panels, car parts, etc.
Benefits of Enka-Channel
- Even resin distribution.
- Flexible.
- Minimal resin consumption.
- Low profile, resulting in minimal exothermic heat build-up.
- No imprint in the laminate.
- High compression strength.
Specifications
Width: 100 mm (also available in 50 mm)
Thickness: approx. 2 mm
Packaging: 5 metres, 20 metres (full roll)
Product properties
The key technical properties clearly listed in one place.
- Article number
- VAC000439
-
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
- Harstoevoer
-
The measurement across a product from one side to the other, for example for rolls, panels or fabrics. With rolled materials, the usable width may differ from the overall width.
- 10 cm
-
The physical thickness of the supplied material, such as a panel, pad, film or foam sheet. This differs from the thickness of a liquid coating applied to a surface.
- Approximately 2 mm
- Net contents
- 25 m (full roll), 5 m