International Danboline bilge paint
At a glance
- 1-component bilge paint
- Wear-resistant coating
- For bilges and lockers
International Danboline is a protective coating for bilges, bulkheads and lockers. The bilge paint protects parts against moisture and corrosion. Danboline is resistant to oil and fuel spills and has excellent coverage.
Benefits International Danboline
- Wear-resistant coating for bilges, bulkheads and lockers.
- Chemically resistant to fuel, oil and mild chemicals.
- Excellent coverage.
Suitable substrates
International bilge paint is suitable for use on the following substrates:
- Aluminium / zinc-galvanised steel
- GRP/FRP
- Steel
- Wood
Specifications
Packaging: 0.75 L and 2.5 L
Colour: white, grey
Finish: glossy
Suitable for: bilges, bulkheads and lockers
Application method: brush or nylon-fur roller
Min. application temperature: 5℃
Coverage: 11 m2/L
Recommended number of coats: 1-2
Drying time: 6 hours (23°C)
Shelf life: 2 years
VOC: 411 g/L
Product properties
The key technical properties clearly listed in one place.
- Article number
- BOO001461
-
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
- Finish coat
-
The materials, substrates or tasks a product is intended for. A general claim such as 'suitable for plastics' does not mean it works with every type of plastic; the specific substrate and its preparation still matter.
- Polyester boten, Stalen-boten, Aluminium boten, Houten boten
-
The recommended number of coats needed to achieve the intended coverage, thickness or protection. Highly absorbent substrates or different application methods may require additional coats. Allow for the specified time between coats.
- 1-2 coats
-
The time needed for an applied layer to dry, for example as water or solvent evaporates. Reactive products may also undergo chemical curing. A surface that feels dry is therefore not necessarily fully cured or ready to be loaded.
- 6 hours (23 °C)
-
The period for which an unopened product remains usable under the specified storage conditions. Check whether the period starts from the manufacturing date or another date. Shelf life may be shorter after opening, especially for products sensitive to air or moisture.
- 24 months
-
Minimum application temperature is the lowest temperature at which a product may be used according to the manufacturer. The limit can apply to the air, substrate and product itself.
At lower temperatures, resins and coatings can become thicker and cure more slowly. Moisture can also condense on a cold substrate and reduce adhesion. Check the dew point and measure the surface temperature before starting. A longer drying time does not automatically make application below the specified minimum acceptable.
- 5 °C
-
Consumption or coverage describes how much product is needed for a given surface area. Consumption may be stated in g/m² or kg/m², while coverage is often given in m²/L or m²/kg. A consumption of 0.2 kg/m² means a theoretical 200 grams per square metre. Actual use depends on film thickness, substrate absorbency, application method and waste.
- 11 m²/L
- Net contents
- 2.5 L, 750 ml
-
The application or processing methods specified by the manufacturer, such as brushing, rolling, spraying, casting or hand laminating. The chosen method can affect consumption, layer thickness and finish.
- Brush, Nylon paint roller, Pile roller
-
VOC content (volatile organic compounds) indicates the amount of these substances in a product, usually expressed in g/L (grams per litre). They may evaporate during application and drying. The value describes the composition, but actual exposure also depends on how much is used, ventilation and the application method.
- 411 g/L
Reviews
Frequently bought together
Useful additions for your project.