Ranex Rustbuster

Ranex Rustbuster is the ultimate solution for rust removal. This powerful rust remover eliminates heavy rust, surface rust and flash rust deep within the metal without the need for blasting or sanding. After a simple treatment with Ranex Rustbuster, the surface is restored to a clean, rust-free condition and looks like new again.

Unlike many other rust removers, Ranex Rustbuster leaves no unwanted residue behind, allowing the surface to be coated immediately with a primer or protective coating.

Benefits of Ranex Rustbuster

• Removes rust deep into the pores of the metal. 
• Does not adversely affect coatings, lacquer, polyester or rubber.
• Provides temporary protection for up to 6 weeks.
• Environmentally friendly.
• Suitable for rust removal on steel, iron, cast iron and stainless steel.

Applications

Ranex Rustbuster is suitable for the following applications:

• Removal of heavy rust from deeply corroded surfaces.
• Removal of surface rust, flash rust and rust streaks.
• Removal of rust and loose scale deposits on stainless steel, chrome, copper, polyester (gelcoat).
• Removal of limescale deposits.

Important: avoid contact with aluminium, dry concrete, antifouling coatings, natural stone, marble, anodised and galvanised surfaces, and plastics. Always test painted and lacquered surfaces for colour fastness in an inconspicuous area before use. Discolouration may occur.

Directions for use

Ranex Rustbuster is easy to use. Follow the steps below for proper application of this rust remover:

1. Remove loose paint and rust.
2. Clean the surface thoroughly with a degreaser.
3. Make sure the surface is dry.
4. Apply Ranex Rustbuster with a roller or brush.
5. Allow the product to dry for 24 hours for best results.

Specifications

Packaging: 250 ml, 500 ml, 1 L, 4 L and 20 L
Application method: brush or roller
Coverage (for heavy rust): 8 m²/L
Coverage (for flash rust): 30 m²/L