Farécla G3 Pro Deep Clean Clay Mitt

Farécla G3 Pro Deep Clean Clay Mitt
Farécla G3 Pro Deep Clean Clay Mitt
  • Does not cause swirl marks
  • Applicable to all types of paint
  • Convenient and easy to use

This revolutionary, re-usable Deep Clean clay mitt uses an advanced rubber polymer technology that easily removes ingrained dirt, bugs, tar spots and dulling pollutants from paintwork, windscreens and headlights. An easy to use alternative to a traditional clay bar.

Farécla G3 Pro Deep Clean Clay Mitt

  • Lasts up to 5 times longer than traditional clay bars.
  • Unique composition, structure and quality of clay.
  • Does not cause swirl marks or marring.
  • Applicable to all types of paint.
  • Easy to use and reusable.
  • Advanced rubber polymer technology.
We are often asked: “What is the coarseness of the clay?” With this clay mitt, Farécla has chosen to let go of that and 'just' develop a very good clay mitt.

When to use this clay mitt?

Good preparation is half the battle, especially when cleaning your car. By using the clay glove you prevent new scratches in the paint while brushing away the smallest dirt. Run your hand over the cleaned surface. If the surface feels 'rough' or 'not smooth', it is highly recommended to use the clay mitt.

Instructions for use for the Farécla G3 Pro Deep Clean Clay Mitt

Before using the clay mitt, it is important to first wash the surface thoroughly with a shampoo such as the Farécla G3 Pro Shampoo. After this, spray the surface so that the coarsest dirt is removed. Then follow these instructions:

  1. Wet the clay mitt (possibly with a cleaner).
  2. Lightly spray the area to be cleaned and the mitt with the cleaner.
  3. Wipe over the surface with the clay side of the mitt in short straight movements. Rub without pressure, let the mitt slide over the paint.
  4. Wipe clean with the cloth side of the mitt, until surface is smooth. You know this by feeling. Run your hand over the surface and feel if it is smooth.
  5. After use, rinse off accumulated contaminants on the clay side and allow to dry.

Always keep the clay mitt lubricated. This lubricant allows the clay mitt to glide over the paint without the risk of damage. It is best used in combination with cleaner. You can also use Farécla G3 Pro Detailer as a lubricant.

We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.

Product Choices

Farécla
24,99 24,99
pieces
Only 3 pieces left in stock

Receive a back in stock email.

Ordered today before 17:00, shipped today!
  • Extensive range!
  • PayPal, Mastercard, Visa, American Express
  • Fast reliable delivery in Europe (1-5 days)
  • Free advice from a specialist!
Product advisor

We will be happy to give you advice!