Farécla G3 Pro Scratch Remover (Liquid)
Farécla G3 Professional Scratch Remover is a professional scratch remover that has been specially developed to permanently remove scratches, bird droppings, tree resin or other absorbed dirt from all types of paint by hand. This polishing agent also immediately restores the shine of the paint. This scratch remover is especially for the do-it-yourselfer who wants to remove scratches or restore the colour of a painted surface quickly and without expensive investments. Ideal for quickly removing scratches from your car, caravan or boat, for example.
The unique properties of Farécla G3 Pro Scratch Remover
- Eliminates light scratches and diminishes the look of deeper defects
- Restores the colour of the paint in case of serious contamination.
- Free from fillers or silicones.
- Can be processed manually with hand polishing pads and a clean polishing cloth.
- 3 time winner of the Best Scratch Remover Award.
What scratches can I remove from the paint?
To check whether you can remove scratches with G3 Pro Scratch Remover, you can perform a simple test. Run your fingernail over the scratch mark. If your nail is not forced to follow the scratch, so it can run out of the scratch, you can remove the scratch with the Scratch Remover. If your nail is forced to follow the scratch, you probably won't be able to completely remove the scratch, but you will be able to remove most of it. You can also wet the scratch with water or saliva. Once the scratch is no longer visible, you can almost always polish it away completely.
What is the difference between the tube (paste) and the bottle (liquid)?
Farécla Scratch Remover is available in two variants, a paste and a liquid. But what is the difference between the two and which one should I take? Good question! The paste (150 ml tube) is slightly more aggressive, has a lower gloss level and must be processed in combination with water, making it less user-friendly. Due to the lower gloss level, you would almost always have to refinish it with a gloss restorer. The tube is suitable for small surfaces, because you can check this more easily due to the thicker mass.
Scratch Remover in the liquid version (500 ml bottle) is easier to rub out, is moderately aggressive and gives a good shine. This variant is the solution for repairing scratches in 90% of cases. The liquid variant is suitable for large surfaces because it is easier to spread.
Applications
We recommend using this scratch remover in combination with the Farécla white Pro Applicator Waffle Pad. The liquid scratch remover spreads easily and is ideal for larger surfaces.
What can I use G3 Pro Scratch Remover on?
This Farécla scratch remover is suitable for use on all painted surfaces. The product is also suitable for use, for example, for polishing lacquered kitchen cabinets. In addition, polyester and gelcoat surfaces can also be easily treated with Scratch Remover.
Scratch remover instructions for use
Farécla G3 Pro Scratch Remover is easy to use. Follow the instructions below for optimal results.
- Dampen a G3 Pro White Waffle Applicator Pad.
- Apply a small amount of G3 Pro Scratch Remover to the pad.
- Rub in a back and forth motion (approximately 1.5 - 2 minutes).
- Buff off with a clean, dry, soft microfibre cloth.
- Reapply if necessary.
Properties
Contents: 500 ml
Packaging: bottle (liquid)
pH: 8.8
Article number: 7164
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
