Farécla G3 Pro Multicleaner
- Safe on all surfaces
- Silicone-free
- Very powerful cleaner
Farécla G3 Pro Multicleaner is a rigorous yet safe all purpose cleaner (APC) that is safe to use on fabric and hard surfaces, including engine bays, wheel arches, carpets and upholstery. The cleaner is solvent-free and breaks down grease and dirt upon contact. In addition, G3 Pro Multicleaner is silicone-free, which means it will not discolour rubber, plastic, vinyl or fabric.
For maximum performance use neat, but it can be diluted with water for lighter contamination.
Cleaning the car dashboard
No one likes a dirty and sticky car dashboard, its a clear sign that it needs to be cleaned! Farécla Multicleaner is perfectrly suitable for this. First remove all loose dirt and vacuum the dashboard if necessary. Then clean the dashboard with Pro Multicleaner and a microfibre cloth.
Features G3 Pro Multicleaner
- Safe on all surfaces.
- Will not stain or discolour rubber, plastics and vinyl.
- Highly effective engine bay cleaner.
- Breaks down oil and grease.
- Silicone free (bodyshop safe).
Instructions for use
Farécla's all-purpose cleaner is easy to use and suitable for the interior and exterior of your car. Follow the instructions below for optimal results:
Interiour
- If needed, vacuum all upholstery and carpets.
- Spray Multicleaner onto the area to be cleaned or on a clean, dry microfibre cloth.
- Agitate with a brush or a clean, dry microfibre cloth if needed.
- Remove any residue with a clean, dry microfibre cloth.
Exteriour
- Spray Multicleaner onto the area to be cleaned or on a clean, dry cloth.
- Agitate with a brush or a clean, dry microfibre cloth if needed (repeat for heavily soiled areas).
- Wipe the surface clean and remove any residue.
Suggested dilution ratios:
Interiour: dilute up to 10:1 (water: multicleaner), for heavily soiled surfaces it can also be applied neat (undiluted).
Exteriour: use neat (undiluted) for heavy dirt, or diluted up to 2:1 (water: multicleaner) for maintenance clean.
Engine bay: use neat (undiluted) to break down oily residue. Through a foam lance: within the foam lance bottle mix 250ml of solution to 750ml of water. For optimal results, use in combination with a high-pressure cleaner.
Wheel arches: use neat (undiluted) or diluted up to 2:1 (water: multicleaner) for maintenance.
Tyres: use neat (undiluted) or diluted up to 2:1 (water: multicleaner) for maintenance.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
