Aramid Fibre Tape 190 gr/m2 25 mm
At a glance
- Decorative tape
- High impact resistance
- Easy to apply
Aramid woven tape is a high-quality reinforcing material made from aramid fibres, also known by brand names such as Kevlar. With a weight of 190 g/m2 and a width of 25 mm, this tape is particularly suitable for narrow, precise repairs in hard-to-reach areas, edges, corners and thin profiles.
Compared with glass fibre, aramid offers significantly higher tensile strength and stiffness at lower weight. Compared with carbon fibre, aramid has better impact resistance and toughness. It absorbs impact energy more effectively and is less prone to sudden fracture, although carbon fibre is stiffer. Aramid is therefore preferred where protection against impact and dynamic loads is particularly important.
Features of aramid woven tape
- High tensile strength.
- High stiffness.
- Excellent impact resistance.
- Low density.
- Compatible with epoxy, vinyl ester and polyester resins.
- Suitable for hand lay-up, wet bagging and vacuum infusion.
Specifications
Weight : 190 g/m2
Width : 25 mm
Weave type : plain weave
Available lengths : 5 m, 10 m, 25 m, 50 m
Resin consumption
| Application method | Layer thickness | Resin consumption per m² | Resin consumption per linear metre |
| Hand lay-up | 0,48 mm | approx. 349 g/m2 | approx. 9 g/m |
| Wet bagging | 0,38 mm | approx. 241 g/m2 | approx. 6 g/m |
| Vacuum infusion | 0,36 mm | approx. 221 g/m2 | approx. 6 g/m |
Vacuum infusion gives the thinnest laminate and lowest resin consumption, resulting in an optimal fibre-to-resin ratio and a lighter finished part. Hand lay-up needs more resin but is more accessible for small repairs and DIY applications.
Product properties
The key technical properties clearly listed in one place.
- Article number
- KOO000112
-
Fibre type affects a composite's strength, stiffness, toughness and weight. Common reinforcement fibres include:
- Glass fibre: a cost-effective choice used widely in polyester and epoxy laminates.
- Carbon fibre: very stiff and lightweight, suitable for parts that need to be light and hold their shape.
- Aramid: a tough fibre with good resistance to certain impacts and tearing, but often harder to cut neatly and sand.
Final properties also depend on fibre orientation, fabric type, resin content and laminate quality.
- Kevlar
-
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
- Weefselband
-
Fabric or reinforcement type describes how the fibres are arranged. This affects how easily the material drapes over a shape and which directions it mainly reinforces.
- Plain weave (square weave): the yarns pass alternately over and under each other. The fabric is stable and works well on flat or gently curved surfaces.
- Twill weave: recognisable by its diagonal pattern. It is more flexible than plain weave and drapes more easily over curves.
- Unidirectional reinforcement (UD): the fibres run mainly in one direction, usually marked 0°. It provides reinforcement primarily along that direction.
- Multiaxial reinforcement: fibres are arranged in several directions, for example biaxial (+45°/-45°), Square (0°/90°) or triaxial (0°/+45°/-45°). Fibre bundles are normally held together by stitching rather than a conventional weave.
Note: a Square reinforcement (0°/90°) is not the same as a plain-woven square fabric. Also consider fibre type and areal weight (g/m²).
- Plain
-
The measurement across a product from one side to the other, for example for rolls, panels or fabrics. With rolled materials, the usable width may differ from the overall width.
- 25 mm
- Length
- 10 m, 25 m, 5 m
-
Areal weight is the weight of one square metre of dry reinforcement, expressed in g/m² (grams per square metre). For example, 200 g/m² glass fabric contains 200 grams of dry fibres per m², without resin. Areal weight helps with reinforcement selection and resin consumption estimates, but it is not the final laminate thickness.
- 190 g/m²
Reviews
Frequently bought together
Useful additions for your project.