SCIGRIP SG5000-06 Methacrylate Adhesive
At a glance
- For bonding metals and plastics
- No application gun required
- Including mixing tubes
Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops
Product description
SCIGRIP SG5000-06 is a high-strength two-component methacrylate adhesive for bonding metals, plastics and composites. Most materials such as aluminium, steel and composites can be bonded without surface preparation.
This two-component adhesive is strong and offers excellent adhesion, even if the pretreatment is not optimal. The 1:1 non-critical mix ratio makes this adhesive less sensitive to mixing errors. In addition, the cartridge is easy to use; an application gun is not necessary. After attaching one of the supplied mixing nozzles, the material is ready for use. The working time is 6 minutes. The material then cures rapidly. After approximately 30 minutes, the adhesive is lightly loadable. Full strength is reached after 24 hours.
Are you looking for a similar adhesive with a shorter curing time? Then consider SCIGRIP SG5000-03!
Benefits of SCIGRIP SG5000-06
- Suitable for bonding metals, plastics and composites.
- Minimal surface preparation required.
- No application gun required.
- Fast bonding.
- Rapid strength build-up.
Suitable for
- Epoxy
- FRP (polyester and vinyl ester)
- Gelcoat
- Aluminium
- Carbon fibre
- Stainless steel
- ABS
- PVC
- PC
- Vinyl
- Acrylic
Specifications
Mixing ratio: 1:1
Working time: 6 minutes
Full strength: after 24 hours
Packaging: 25 ml (incl. 3 mixing tubes)
Colour: amber
Application gun: not required
Product properties
The key technical properties clearly listed in one place.
- Article number
- LIJ001278
-
Open time is the period during which an applied adhesive, sealant or mortar can still be assembled, positioned or adjusted. It is usually given in minutes under specified conditions, often around 20 or 23 °C. Open time generally starts at application and may differ from the working time after mixing.
- 1 tot 10 minuten
-
Adhesive type describes the family of adhesive or sealant, such as epoxy adhesive, (methyl)methacrylate adhesive, polyurethane adhesive or polymer sealant. Its chemistry affects processing, curing, flexibility and adhesion. Products of the same type may still differ, so check the suitable substrates and application instructions.
- Methyl Methacrylaatlijm
- Colour
- Overig
-
This property lists the substrates on which an adhesive, resin or coating can achieve strong adhesion according to the product information. The result also depends on surface preparation.
- Cleaning and degreasing: removes dirt, oil and other substances that interfere with bonding.
- Sanding or roughening: can improve adhesion when suitable for the substrate.
- Primer: required or recommended for some surfaces.
Materials such as PE, PP and PTFE are difficult to bond with many conventional adhesives and may need a specialist adhesive or pretreatment. If in doubt, test adhesion on a small area.
- Glas/Epoxy (GRE), Polyester (FRP), Roestvast staal (RVS), Aluminium, Koolstof/Epoxy (CFRP), ABS, PVC, Polycarbonaat (PC)
- Net contents
- 25 ml
-
Working time is the period during which a product remains workable after mixing or activation, usually given in minutes at a specified temperature, often 20 °C. With reactive resins, the chemical reaction also continues in the mixing container, and larger quantities or higher temperatures can shorten this time. Working time is different from gel time and full curing time.
- Approximately 6 minutes
Reviews
Frequently bought together
Useful additions for your project.
Recommended
Often chosen
Often chosen
