SCIGRIP SG5000-03 Methacrylate Adhesive
At a glance
- Methacrylate adhesive
- Fast curing
- No pretreatment required
Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops
SCIGRIP SG5000-03 is a high-strength two-component methacrylate adhesive for bonding metals, plastics and composites. It offers a unique combination of a convenient 1:1 non-critical mixing ratio and excellent adhesion to a wide range of materials. SG5000-03 has a very short fixture time. After 6-8 minutes, the adhesive is fully cured. The working time is 2-5 minutes.
Thanks to its fast curing and rapid strength build-up, the SCIGRIP SG5000 series is the ideal choice for various bonding applications.
Are you looking for an adhesive that you can use without an application gun, with similar properties to the SG5000-03? Then consider SCIGRIP SG5000-06. This adhesive has a longer working and curing time.
Benefits of SCIGRIP SG5000-03
- Suitable for bonding metals, plastics and composites.
- Minimal surface preparation required for a more efficient assembly process.
- Fast bonding.
- Rapid strength build-up.
- Excellent environmental and chemical resistance.
Suitable for
SCIGRIP SG5000-03 is suitable for bonding the following materials:
- Epoxy
- Polyester and vinylester
- Gelcoats
- Aluminium
- Carbon fibre
- Stainless steel
- ABS
- Vinyl
- PVC
- Polycarbonate
- Acrylic
Specifications
Working time: 2-5 minutes
Fixture time: 6-8 minutes
Mixing ratio: 1:1
Colour: amber
Mixing nozzle: C
Application gun: LS50-1
Contents: 50 ml
Product properties
The key technical properties clearly listed in one place.
- Article number
- LIJ001319
- Colour
- Rood
-
Open time is the period during which an applied adhesive, sealant or mortar can still be assembled, positioned or adjusted. It is usually given in minutes under specified conditions, often around 20 or 23 °C. Open time generally starts at application and may differ from the working time after mixing.
- 1 tot 10 minuten
-
Adhesive type describes the family of adhesive or sealant, such as epoxy adhesive, (methyl)methacrylate adhesive, polyurethane adhesive or polymer sealant. Its chemistry affects processing, curing, flexibility and adhesion. Products of the same type may still differ, so check the suitable substrates and application instructions.
- Acrylaatlijm
-
This property lists the substrates on which an adhesive, resin or coating can achieve strong adhesion according to the product information. The result also depends on surface preparation.
- Cleaning and degreasing: removes dirt, oil and other substances that interfere with bonding.
- Sanding or roughening: can improve adhesion when suitable for the substrate.
- Primer: required or recommended for some surfaces.
Materials such as PE, PP and PTFE are difficult to bond with many conventional adhesives and may need a specialist adhesive or pretreatment. If in doubt, test adhesion on a small area.
- Glas/Epoxy (GRE), Koolstof/Epoxy (CFRP), Aluminium, Roestvast staal (RVS), ABS, PVC, Polycarbonaat (PC)
-
Curing time is the period a product needs to reach a specified stage of cure. It is usually given in hours or days, often at a reference temperature such as 20 °C. A product may be tack-free or safe to handle before reaching its full mechanical and chemical resistance. Film thickness and mixed quantity may also affect the time.
- 6-8 minutes
- Net contents
- 50 ml
-
Working time is the period during which a product remains workable after mixing or activation, usually given in minutes at a specified temperature, often 20 °C. With reactive resins, the chemical reaction also continues in the mixing container, and larger quantities or higher temperatures can shorten this time. Working time is different from gel time and full curing time.
- Approximately 2-5 minutes
Reviews
Frequently bought together
Useful additions for your project.
Often chosen
Recommended
