Weld Mount Hose and Cable Clamps
- For 12 or 19 mm diameter hose
- SHC500 & SHC750
- Distance between the studs: 1.2 m
Weld Mount hose and cable clamps are used to secure cables, hoses and pipes to smooth surfaces. The clamps can be mounted in a swivel position, allowing movement to be absorbed.
Weld Mount hose and cable clamps are attached to the surface using a stainless steel stud.
Specifications
SHC500
- Clamp: SHC500.
- Diameter of pipe or cable: 12 mm.
- Required stainless steel stud: SS M6 x 35 mm.
- Maximum distance between two studs: 1.2 metres.
SHC750
- Clamp: SHC750.
- Diameter of pipe or cable: 19 mm.
- Required stainless steel stud: SS M6 x 40 mm.
- Maximum distance between two studs: 1.2 metres.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
