Mirka Polarshine 20 Polishing Compound (medium)
At a glance
- Medium coarse polishing compound
- Removes scratches
- Provides a high-gloss finish
Mirka Polarshine 20 is a medium-cut polishing compound specially developed to remove scratches from new, freshly applied, and soft paint finishes. It combines strong cutting action with a deep, glossy finish.
Benefits of Mirka Polarshine 20
- Medium coarse polish.
- Gives a nice deep shine.
- Removes scratches and imperfections.
- Suitable for new, fresh and soft paintwork.
- Minimal splashing.
Directions for use
We recommend applying Mirka Polarshine 20 by machine. Follow the steps below for the best polishing result:
- Shake product well before use.
- Clean and dry the surface thoroughly before starting.
- Apply a small amount of polish to medium polishing pad (white).
- Polish the surface at 800 – 1500 rpm with a rotary polishing machine.
- Work on sections of about 40 × 40 cm at a time for optimal results.
- Continue polishing until the desired final gloss is achieved.
- Wipe the surface clean after polishing with a clean microfibre cloth.
Specifications
Contents: 250 ml, 1 litre
Colour: white
Density: 1.15 g/ml
PH: 7-9
Product properties
The key technical properties clearly listed in one place.
- Article number
- POL001841
-
Density describes the mass of a material per unit volume. Values may be given in g/cm³, kg/L or kg/m³; 1 g/cm³ equals 1 kg/L. For example, one litre of a liquid with a density of 1.2 kg/L weighs approximately 1.2 kg. Density helps convert between weight and volume, but it can vary with temperature.
- 1.15 g/ml
-
pH indicates how acidic or alkaline an aqueous solution is and has no unit. A pH of around 7 is neutral; lower values are acidic and higher values are alkaline. The scale is logarithmic: a difference of one pH unit represents approximately a tenfold difference in acidity. pH alone does not fully describe the hazards of a product.
- 7-9
- Net contents
- 1 L, 250 ml