RESION UV Epoxy (gift packaging)

  • Luxury gift packaging
  • Set with base and hardener
  • Contents: 0.8 kg or 1.6 kg

Are you looking for a nice epoxy gift for a friend, family member or acquaintance? Then this luxury epoxy set is highly recommended. The set consists of our most popular epoxy resin in a beautiful gift package. The set is available in 0.8 kg and 1.6 kg packaging.

About RESION UV Epoxy

RESION UV Epoxy Resin (UV Cast25) is a high quality epoxy casting resin with very high UV resistance and transparency. This UV casting resin has been specially developed to prevent long-term discoloration due to sunlight. It is therefore not necessary to add a UV stabilizer to this product! This makes RESION UV Epoxy Resin even easier to use and can be used very widely. In addition, the quality of the resin is much higher, which gives better results.

Benefits of RESION UV Epoxy 

  • Very high quality epoxy.
  • Highest UV resistance on the market.
  • Very transparent.
  • Solvent-free.
  • Odourless.
  • Can be poured up to 3 cm thick.

Epoxy resin instructions for use

The epoxy resin, as you are used to from RESION's other types of epoxy, is easy to use. For this, mix the base and hardener according to the ratio indicated on the package (100:60) and make sure to stir it well for three minutes. Below we briefly explain how to process the RESION UV Epoxy Resin:

  • Weigh the base component (A) and hardener (B) thoroughly according to the mixing ratio indicated on the package (100 parts by weight of resin to 60 parts by weight of hardener).
  • Mix the base and hardener thoroughly for 3 minutes. Also scrape well along the sides and bottom of the mixing cup!
  • If desired, add pigments to color the resin..
  • After application, allow the UV resistant epoxy to cure for about 12-18 hours before it is manageable (please note: after 3-5 days, the epoxy is only fully cured).
Tip: weighing and mixing the epoxy is very important for a good end result. So do this meticulously and always use scales.

Product properties

Packaging Resin (EP 101UV) Hardener (EP 121UV)
0.8 kg 0.5 kg 0.3 kg
1.6 kg 1 kg 0.6 kg

Mixing ratio: 100:60 (100 grams of resin, 60 grams of hardener)
Processing time: 30-60 minutes at 20°C
Minimum processing temperature: 12°C
Dust dry: after 6-12 hours (20°C) 
Manageable: after 12-18 hours (20°C) 
Full cure: 3-5 days
Heat resistance: 40-45 °C
Shelf life: 1 year (stored in a dark place at 15-20°C)

All mixing ratios in a handy overview? Please check the mixing schedule epoxy (100:60).

 

We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.

Product Choices

RESION
26,99 26,99
Contents Price
pieces

Receive a back in stock email.

  • Extensive range!
  • PayPal, Mastercard, Visa, American Express
  • Fast reliable delivery in Europe (1-5 days)
  • Free advice from a specialist!
Product advisor

We will be happy to give you advice!