Motip Metallic Paint
At a glance
- Fast-drying
- Resistant to weathering
- In gold and silver
Motip Metallic Paint is a fast drying acrylic paint with excellent adhesion on both treated and untreated surfaces including metal, stone, wood, glass, and various types of plastic. The lacquer is wear resistant, resistant to weather influences, and ideal for decorative finishes. Available in gold and silver colours.
Features Motip Metallic Paint
- Fast drying.
- Wear resistant.
- Weather resistant.
- Excellent coverage.
Directions for use
- Ensure the spray can is at room temperature (ideal: 10–25°C).
- Shake the can well for 2 minutes before use and test on a sample surface.
- Hold the can 25 to 30 cm from the surface.
- Spray in several thin layers for an even finish.
- Shake the can again before each new layer.
- After use: clean the valve by turning the can upside down and pressing the nozzle for about 5 seconds.
Product properties
The key technical properties clearly listed in one place.
- Article number
- LAK000828
-
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
- Aerosols
-
The chemical base describes the chemistry of an adhesive, sealant, resin or coating, such as epoxy, polyester, polyurethane, (methyl)methacrylate or a hybrid polymer. It affects curing, flexibility and adhesion. Products with the same chemical base are not necessarily suitable for the same applications.
- nitrocombi resin
-
The period for which an unopened product remains usable under the specified storage conditions. Check whether the period starts from the manufacturing date or another date. Shelf life may be shorter after opening, especially for products sensitive to air or moisture.
- 10 years
-
Maximum application temperature is the highest temperature at which a product may be used according to the manufacturer. The limit may apply to the air, substrate or product itself; check the measurement conditions.
At higher temperatures, many two-component products react faster. Working time may become much shorter, making large areas harder to finish neatly. Some products are also more prone to bubbling or uncontrolled curing. Maximum application temperature is not the same as heat resistance after curing.
- 25 °C
-
Minimum application temperature is the lowest temperature at which a product may be used according to the manufacturer. The limit can apply to the air, substrate and product itself.
At lower temperatures, resins and coatings can become thicker and cure more slowly. Moisture can also condense on a cold substrate and reduce adhesion. Check the dew point and measure the surface temperature before starting. A longer drying time does not automatically make application below the specified minimum acceptable.
- 10 °C
-
The overcoating interval tells you when the next layer of paint, varnish or coating may be applied. Many multi-coat systems specify both a minimum and a maximum interval:
- Minimum overcoating time: the previous layer is dry or cured enough to accept another coat.
- Maximum overcoating time: the period during which the next coat can bond without extra surface preparation under the stated conditions.
Overcoating too early can affect drying or the finish. Once the maximum interval has passed, cleaning and sanding may be needed to ensure adhesion between coats. Temperature and film thickness affect the waiting times.
- 2 hours
-
A paint or varnish layer is dust-dry when settling dust is less likely to stick to the surface. It may not yet be touch-dry, ready for overcoating or suitable for loading; these are different stages of drying and curing.
- 5-10 minutes
-
Curing time is the period a product needs to reach a specified stage of cure. It is usually given in hours or days, often at a reference temperature such as 20 °C. A product may be tack-free or safe to handle before reaching its full mechanical and chemical resistance. Film thickness and mixed quantity may also affect the time.
- 2 hours
- Net contents
- 400 ml
- Colour
- Gold, Silver
-
Heat resistance describes the temperature a material can withstand after correct processing and curing, usually expressed in degrees Celsius (°C). Continuous exposure is different from a brief temperature peak, and mechanical loading may also affect the limit. Heat resistance is not the same as the temperature at which the product can be applied.
- 110°C
-
Consumption or coverage describes how much product is needed for a given surface area. Consumption may be stated in g/m² or kg/m², while coverage is often given in m²/L or m²/kg. A consumption of 0.2 kg/m² means a theoretical 200 grams per square metre. Actual use depends on film thickness, substrate absorbency, application method and waste.
- 320 ml/m²