Often chosen
HPX Masking Tape (Washi Tape)
At a glance
- Suitable as fineline tape
- Excellent adhesion
- Remove without adhesive residue
Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops
Washi Tape is a very thin masking tape for making very tight transitions. HPX masking tape is UV-resistant and adheres well to metal, glass, plastic and rubber. Moreover, you can remove this masking tape up to 4 months after mounting without any glue residue.
Masking tape from HPX is suitable as a fineline tape for boat maintenance and automotive applications.
Features Washi Tape
- High-quality "gold" masking tape, for tight lines.
- Good adhesion to metal, glass, plastic and rubber.
- Solvent resistant.
- UV resistant.
- Also suitable as fine line tape for boat maintenance and automotive applications.
Product properties
Type: HPX Masking 4400 Fine Line
Adhesive: acrylate
Colour: orange
Carrier: washi paper
Temperature resistance: 100°C (briefly up to 150°C)
Tensile strength: 75 N/25 mm
Adhesive strength: 5 N/25 mm
Thickness: 0.09 mm
Length: 50 metres
Dimensions:
PF1950 - 18 mm x 50 m
PF2550 - 24 mm x 50 m
Product properties
The key technical properties clearly listed in one place.
- Article number
- HUL001482
-
The tasks a product is intended for, such as laminating, casting, bonding, sealing or protecting. Products intended for the same application can differ considerably in processing, curing time and final properties.
- Masking
-
The purpose of an accessory or consumable during preparation, application or finishing, such as mixing, masking, removing trapped air or dosing. This classification helps you find tools and materials for each stage of a job.
- Tape
-
The product's dimensions, usually shown as length × width × height or another product-specific order. Check whether the measurements describe the outside, inside or usable space, especially for containers and moulds.
- 18 mm x 50 m
-
The physical thickness of the supplied material, such as a panel, pad, film or foam sheet. This differs from the thickness of a liquid coating applied to a surface.
- 0.09 mm
-
The backing material that supports a functional layer, such as paper or fabric behind abrasive grains or film behind an adhesive coating. The backing affects flexibility, tear resistance and suitability for wet or dry use.
- Washi paper
- Length
- 50 m
-
Tensile strength is the maximum tensile stress a material can withstand during a tensile test before failure. It is usually expressed in MPa (megapascals) or N/mm² (newtons per square millimetre); 1 MPa = 1 N/mm². Under comparable test conditions, a higher value means greater resistance to tension. In composites, fibre orientation also affects the result.
- 75 N/25 mm
-
Heat resistance describes the temperature a material can withstand after correct processing and curing, usually expressed in degrees Celsius (°C). Continuous exposure is different from a brief temperature peak, and mechanical loading may also affect the limit. Heat resistance is not the same as the temperature at which the product can be applied.
- Up to 100 °C (short-term up to 150 °C)
Reviews
Frequently bought together
Useful additions for your project.
Often chosen
