3M Scotch-Weld Structural Plastic Adhesive DP8010
- Bonds PE, PP and PTFE
- Very strong bonding
- Long open time
With 3M Scotch-Weld DP8010 Acrylic Adhesive you can effortlessly bond low surface energy plastics, such as polyethylene (PE) and polypropylene (PP), to each other without surface treatment. These materials are often difficult to bond, which makes DP8010 Acrylic Adhesive a very popular adhesive. Cures at room temperature without heat or other chemicals to eliminate complex adhesion processes. In addition, the adhesive has excellent resistance to water and humidity combined with very good chemical resistance results in a bond that can withstand a variety of applications and conditions.
Main features 3M Scotch-Weld DP8010
- Also suitable for bonding PTFE (Teflon).
- Little to no surface treatment required.
- Low odour.
- 10 minutes open time.
- Medium viscosity.
- Cures at room temperature.
Effortlessy bonding polyethylene and polypropylene
Polyethylene is one of the world's most widely used plastics that is used for a wide variety of everyday products. Think of plastic buckets and toys. Polypropylene is a fairly hard plastic and is used for containers and jerry cans, among other things. Polyethylene and polypropylene can be bonded together very well with this 3M Scotch-Weld glue. These plastics can also be glued to materials such as aluminum, steel, glass, wood and hard PVC. Scotch-Weld DP8010 is a very versatile glue! Because these plastics are used in many products, you will certainly need this glue regularly with your DIY jobs. If you order the application gun and the mixing tubes on the right side next to the product, you can get started right away with the right glue for your job.
Product properties Scotch-Weld DP8010
| DP8010 | |
| Contents | 45 ml |
| Colour | Blue |
| Open time | 10 minutes |
| Time to initial strength | 30 minutes |
| Hardness | Shore D 55-60 |
| Odour | Mild |
| Shear strength | 19 N/mm² |
| Peel strength | 28 N/mm² |
| Chemical resistance | *** |
| Viscosity | 27.000 mPa.s |
| Specific gravity | 1.03 g/cm³ |
| Application gun | LS50-4 (50 ml) |
| Suitable mixing tube | Mixing tube B |
Adherence Scotch-Weld DP8010
| DP8010 | |
| Bonds to PE (Polyethylene) | ** |
| Bonds to HDPE | ** |
| Bonds to PP (polypropylene) | * |
| Bonds to PTFE (Teflon) | * |
| Bonds to ABS | ** |
| Bonds to PC | * |
| Bonds to PMMA | |
| Bonds to fibre reinforced products | ** |
| Bonds to aluminum | ** |
| Bonds to galvanized steel | ** |
| Bonds to bare steel | * |
Order 3M glue at Polyestershoppen
Bonding polyethylene and polypropylene together or bonding them to other surfaces has never been easier. Order this 3M DP8010 glue easily online. If you order before 5:00 PM Dutch time on week days, the acrylic glue will be shipped the same day. Do you have any questions? Take a look at our ons informaton centre, contact us by calling +31 85 022 0090 or send an email to support@polyestershoppen.com.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
Safety equipment
Gevaar
| Code | Description |
|---|---|
| H317 | May cause an allergic skin reaction. |
| H318 | Causes serious eye damage. |
| H334 | May cause allergy or asthma symptoms or breathing difficulties if inhaled. |
| H341 | Suspected of causing genetic defects <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>. |
| H360 | May damage fertility or the unborn child <state specific effect if known > <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>. |
| P261 | Avoid breathing dust/fume/gas/mist/vapours/spray. |
| P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
| P310 | Immediately call a POISON CENTER/doctor/… |
| P304+P340 | IF INHALED: Remove person to fresh air and keep comfortable for breathing. |
| P305+P351+P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
