Araldite 2015-1 Epoxy Adhesive
- Highly impact resistant
- For GRP and SMC bonding
- In handy double syringe
Araldite 2015-1 is a tough, paste-like epoxy adhesive, that cures at room temperature. The thixotropic adhesive is particularly well suited for SMC and GRP bonding.
Features Araldite 2015-1 Epoxy Adhesive
- Highly impact-resistant.
- Good resistance to chemicals, heat and water.
- Ideal for GRP and SMC bonding.
Araldite 2015-1 is suitable for bonding the following applications:
- Ferrous metals, aluminum, copper, zinc and galvanised products.
- Fibre-reinforced polyester.
- Thermosetting composites.
- Ceramic materials.
- Glass fibre reinforced plastics and epoxies.
- Various rubbers.
Specific weight: 1.4 g/cm3
Shear strength: 17 N/mm2
Peel strength: 5 N/mm
Crack-filling capacity: up to 10 mm
Open time: 30 to 60 minutes
Temperature resistance: -60°C to +140°C
Minimum curing time for initial strength: 4 hours for 1 N/mm2 on aluminum at 23°C Packaging:
- 50 ml double cartridge (application gun and mixing tubes required)
- 200 ml double cartridge (application gun and mixing tubes required)
- 2 kg double pack (no application gun and mixing tubes required)
In combination with the right application gun and suitable mixing tubes you can use Araldite 2015-1 instantly!
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
|H314||Causes severe skin burns and eye damage.|
|H315||Causes skin irritation.|
|H317||May cause an allergic skin reaction.|
|H318||Causes serious eye damage.|
|H411||Toxic to aquatic life with long lasting effects.|
|P261||Avoid breathing dust/fume/gas/mist/vapours/spray.|
|P273||Avoid release to the environment.|
|P280||Wear protective gloves/protective clothing/eye protection/face protection.|
|P310||Immediately call a POISON CENTER/doctor/…|
|P303+P361+P353||IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].|
|P304+P340||IF INHALED: Remove person to fresh air and keep comfortable for breathing.|
|P305+P351+P338||IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.|
|P333+P313||If skin irritation or rash occurs: Get medical advice/attention.|
|P362+P364||Take off contaminated clothing and wash it before reuse.|
|P501B||Dispose of contents / container in accordance with local, regional or international regulations|
|EUH205||Contains epoxy constituents. May produce an allergic reaction.|