Enkachannel 50mm


- Goede aanvoer van hars
- Geen afdruk in het laminaat
EnkaChannel 50mm is an feed line which transports resin very well. Due to the flat construction, this feed line does not leave any impressions in the laminate. The Enkachannel can easily be cut to size and secured to the infusion mesh.
This feed line is used for working with resin infusion. Examples of products are boats, windmill blades, scooter hoods, car parts, etc.
Properties EnkaChannel
- Even flow
- Flexible
- Minimal resin uptake
- Low profile, so low exotherm heat
- No imprint in the laminate
- High compression strength
Properties
Width: 50 mm
Thickness: ca. 2 mm
Pack size: 5 meter, 20 meter, 100 meter
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.