Spray glue for resin infusion
- Very good adhesion to fabrics
- Fast tack development
- Pack size: 500 ml
Stevik spray glue for resin infusion. This spray glue adheres fabrics and infusion consumable together, to they will not move. This saves time and increases quality. It is also possible to -re-glue certain materials so they are easier to handle.
Tip for wet bagging: glue together the perforated film and bleeder. This saves precious time when the consumables need to be applied.
Tip for resin infusion: glue together the perforated film and the infusion mesh. This is easier to handle than the 2 materials seperately.
Tip for resin infusion: glue together the perforated film and the infusion mesh. This is easier to handle than the 2 materials seperately.
Stevik spray glue is compatible with epoxy and polyester.
Properties
- Easy to apply
- For epoxy and polyester
- Good adheion to fibers
- For glass, aramide and carbon fibers
Pack size: spray can of 500 ml
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
Safety equipment
Gevaar
| Code | Description |
|---|---|
| H222 | Extremely flammable aerosol. |
| H229 | Pressurised container: May burst if heated. |
| H315 | Causes skin irritation. |
| H319 | Causes serious eye irritation. |
| H336 | May cause drowsiness or dizziness. |
| H411 | Toxic to aquatic life with long lasting effects. |
| P210 | Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. |
| P211 | Do not spray on an open flame or other ignition source. |
| P251 | Do not pierce or burn, even after use. |
| P273 | Avoid release to the environment. |
| P391 | Collect spillage. |
| P410+P412 | Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F. |
