Dr. Schutz Floor Cleaner for silk gloss floors

Dr. Schutz PU Cleaner is a powerful, concentrated floor cleaner specially developed for cleaning floors finished with a matte coating.It is ideal for use immediately after the installation of a PU or epoxy floor, and also suitable for the daily cleaning of such surfaces.

Thanks to its excellent dirt-binding and degreasing properties, Dr. Schutz easily removes stubborn dirt, even greasy residues.The cleaner does not damage the top layer, causes no dull haze, and leaves no residue.As a result, the floor remains in top condition: clean, safe, and attractive.

Dr. Schutz PU Cleaner meets the requirements of DIN 180322 and DIN 14904 for sports floors and is also suitable for removing greasy residues in areas such as kitchens.

Features of Dr. Schutz PU Cleaner

• Extremely effective against dirt and greaseZeer krachtig tegen vuil en vet.
• Does not damage the coating or top layerTast de coating of toplaag niet aan.
• Leaves no streaks or residue
• Meets DIN 18032 and DIN 14904 standards (suitable for sports floors)

Dr. Schutz PU Floor Cleaner meets the requirements of DIN 180322 and DIN 14904 for sports floors and is also a suitable cleaner for greasy residues, e.g. in kitchens.

Application

• Removal of building dirt (intensive cleaning):
  start by sweeping or vacuuming coarse and loose dirt. Then dilute the floor cleaner for silk-gloss floors in a ratio of 1:10 (1 litre of cleaner to 10 litres of water). In the case of little dirt, you can increase the dilution in accordance with the degree of soiling. Spread the cleaning solution over the floor and allow to work in for approximately 10 minutes (do not allow to dry). Now work the floor with a scrubber, pad holder system or single-disk machine. Then remove the soiled water with a floor wiper, hoover or absorbent mop and rinse the floor thoroughly with clean water.
  
  
• Basic cleaning (for daily use):
  for domestic use, PU cleaner should be diluted in a ratio of 1:200 (50 ml cleaner to 10 litres of water) with water. For use in cleaning machines, the dilution can be increased to 1:400 (25 ml on 10 litres of water). Check "intensive cleaning" in the instructions for use.

Note: avoid contact of the solution with sensitive surfaces such as wood, metal, or furniture.

Specifications

Contents: 750 ml
pH-value: approx. 9.5 (concentrate)
Consumption: 

• approx. 2-3 litres per 100 m² (removal of building dirt)
• approx. 0.1 litre per 100 m² (maintenance cleaning)