Farécla G3 Premium Abrasive Compound
At a glance
- Coarse and fine in 1 bottle
- Unique polishing agent
- 20% more effective
Farécla G3 Premium Abrasive Compound is one of Farécla's showpieces. This coarse polish is both polish and finish in one bottle! This allows you to easily remove scratches and imperfections from all types of paint and create an unprecedented shine.
G3 Premium easily removes sanding scratches from P1500 grit or finer on all modern paint systems. Its transparent formulation allows you to see the results directly while polishing, without needing to pause and check the surface.
This efficient, silicone-free, water-based compound contains no fillers and delivers a lasting, high-gloss, swirl-free finish without hazing, holograms, or polish marks.
Benefits of Farécla G3 Premium Abrasive Compound
- Easily removes scratches and imperfections from paint.
- Polishing system for 20% faster results.
- Coarse polish and finish combined in one bottle.
- Removes sanding scratches from P1500 in one step.
- Suitable for all types of paint (including the newest paint systems).
- Silicone-free.
Directions for use
For the best polishing results, we recommend using the medium Farécla polishing pad (yellow) for coarse polishing (step 1). Please use a soft Farécla polishing pad (black) for a deep high-gloss finish (step 2).
Step 1: remove scratches and imperfections
- Shake the Farécla G3 Premium Abrasive Compound well before starting.
- Apply a small amount of product to the polishing pad and the surface.
- Spread the polish over the surface without turning on the machine.
- Machine polish using the white pad at medium speed (900-1,300 RPM).
- Wipe the surface clean with a microfibre cloth.
Step 2: remove haze and holograms (finish)
- Shake the Farécla G3 Premium Abrasive Compound well before starting.
- Apply one drop of polish to the surface.
- Spread the product without turning on the machine.
- Machine polish using the black pad at low speed (900-1,300 RPM).
- Wipe the surface clean with a microfibre cloth.
Specifications
Contents: 500 kg, 1 kg
Colour: white
Viscosity: medium
VOC content: 154 g/L
pH-value: 8-9
Product properties
The key technical properties clearly listed in one place.
- Article number
- POL001694
- Polishing compounds
- Grof polijstmiddel, Fine polish
-
The manufacturer's range or series to which the product belongs. Products in the same range are often designed to work together, but may differ in composition, processing and intended use.
- G3
-
pH indicates how acidic or alkaline an aqueous solution is and has no unit. A pH of around 7 is neutral; lower values are acidic and higher values are alkaline. The scale is logarithmic: a difference of one pH unit represents approximately a tenfold difference in acidity. pH alone does not fully describe the hazards of a product.
- 8-9
- Net contents
- 1 kg, 500 kg
-
Viscosity measures how easily a liquid flows, or how thick it is. Dynamic viscosity is usually expressed in mPa·s (millipascal-seconds), sometimes in cP (centipoise); 1 mPa·s = 1 cP. A lower value usually means a more free-flowing liquid, while a higher value indicates a thicker product. Temperature and test method strongly affect the value. Note that mPa·s is different from MPa, which is used to express mechanical strength.
- Medium
-
VOC content (volatile organic compounds) indicates the amount of these substances in a product, usually expressed in g/L (grams per litre). They may evaporate during application and drying. The value describes the composition, but actual exposure also depends on how much is used, ventilation and the application method.
- 154 g/L
Reviews
Frequently bought together
Useful additions for your project.