Polishing stainless steel with Riwax Metal Polish

Stainless steel parts give your boat a sleek, well-maintained appearance. However, salt, moisture, and weather conditions can cause them to become dull or show light rust formation. With Riwax Metal Polish, you easily restore stainless steel and other metals to a high gloss.

This powerful 3-in-1 metal polish cleans, polishes, and protects in a single step. Oxidation, rust spots, clouding, and fine scratches disappear effortlessly, while leaving a protective layer behind at the same time. This keeps the treated surface not only looking better, but also protected against new corrosion for longer.

Riwax Metal Polish is suitable for stainless steel, chrome, aluminum, brass, and other metals, making it a true all-rounder on board.

Polishing stainless steel (step-by-step guide)

Follow the steps below to polish stainless steel with Riwax Metal Polish.

Apply a small amount of Riwax Metal Polish to a clean polishing cloth.
Polish the stainless steel or metal manually with firm pressure until the surface shines again. Use enough product so it can work effectively.
Allow the product to dry briefly.
Wipe off any residue with a clean microfiber cloth and buff to a high gloss.

After treatment, the surface is immediately protected against new deposits and corrosion!

Tip: if the scratches in the stainless steel are too deep, you can also use Metal Polish with a polishing machine and a blue Riwax polishing pad or lambswool pad.