Epifanes PP Vernis Extra | Basis | 1 liter
UFI: 61S0-90Q6-Y00X-WM0
Epifanes PP Varnish Extra is a professional 2-component gloss basecoat with UV filter. This varnish has a high filling capacity and excellent scratch, impact, shock, and wear resistance. It is resistant to various chemicals, alcohols, soft drinks, water and aliphatic and aromatic hydrocarbon solvents. With good adhesion to teak and other oily woods, this varnish is ideal for use on and around boats. The varnish ensures sufficient elasticity and is therefore suitable for masts and other working wooden parts of the boat.
Epifanes varnish provides a deep, long-lasting shine and accentuates the natural structure of the wood. Thanks to its high elasticity, the varnish remains flexible and prevents cracking during temperature fluctuations. The UV-resistant formula protects the wood from aging and yellowing, while the excellent adhesion and flow guarantee a professional end result. Ideal for use on ships, yachts, furniture, and other wooden surfaces exposed to harsh conditions.
This professional varnish is extremely suitable as:
Contents: 2 litres, 10 litres
Mixing ratio: 1:1
Gloss: high-gloss
Colour: transparent
Recommended film thickness: 60 - 70 µm wet = 30 - 35 µm dry
Pot life: 1.5 hours (20°C)
Application temperature: minimum 12°C - maximum 30°C
Theoretical coverage: 14m2 per litre
Dust dry: 30 minutes (20°C)
Recoating interval: 2-3 hours (20°C)
Sandable: 24 hours (20°C)
Density: 1050 gr/dm³
VOC level: 526 g/L Thinner: Epifanes thinner for PP Varnish Extra
Do you have any questions about Epifanes PP Varnish Extra or would you like more information about using this product? No problem, we are happy to provide honest and expert advice! Feel free to contact our specialists via email or WhatsApp. If you order Epifanes PP Varnish Extra before 5:00 pm CET (Central European Time), we will send your order the same day!
The key technical properties clearly listed in one place.
Gloss level indicates how much light a dry paint or coating reflects and how the finished surface looks.
Gloss can be measured in gloss units (GU) at a specified angle. Terms such as matt and satin do not necessarily mean exactly the same thing across manufacturers. Substrate condition and application also affect the final appearance.
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
The recommended layer thickness is the thickness at which you apply each coat of paint, coating or resin. It is usually given in micrometres (µm) or millimetres (mm).
For a coating with 60% solids by volume, a wet film of 100 µm will theoretically produce a dry film of approximately 60 µm. Film thickness affects coverage, protection and drying. Always check whether the manufacturer specifies wet or dry film thickness.
The recommended application temperature range indicates the conditions under which the product can generally be applied and cured properly. Three temperatures matter:
A cold substrate can cause condensation and affect adhesion. At higher temperatures, two-component products may react faster, reducing their working time. Check the dew point and follow the product instructions.
Density describes the mass of a material per unit volume. Values may be given in g/cm³, kg/L or kg/m³; 1 g/cm³ equals 1 kg/L. For example, one litre of a liquid with a density of 1.2 kg/L weighs approximately 1.2 kg. Density helps convert between weight and volume, but it can vary with temperature.
The overcoating interval tells you when the next layer of paint, varnish or coating may be applied. Many multi-coat systems specify both a minimum and a maximum interval:
Overcoating too early can affect drying or the finish. Once the maximum interval has passed, cleaning and sanding may be needed to ensure adhesion between coats. Temperature and film thickness affect the waiting times.
The waiting time before an applied layer is dry or hard enough to sand without smearing or damage. Sanding too early can also clog the abrasive quickly. Layer thickness and temperature affect this time.
A paint or varnish layer is dust-dry when settling dust is less likely to stick to the surface. It may not yet be touch-dry, ready for overcoating or suitable for loading; these are different stages of drying and curing.
Consumption or coverage describes how much product is needed for a given surface area. Consumption may be stated in g/m² or kg/m², while coverage is often given in m²/L or m²/kg. A consumption of 0.2 kg/m² means a theoretical 200 grams per square metre. Actual use depends on film thickness, substrate absorbency, application method and waste.
A specific thinner that can be used, where permitted, to adjust a product's application properties or viscosity. The correct thinner and maximum quantity depend on the product. Incorrect thinning can affect coverage, drying and curing.
Working time is the period during which a product remains workable after mixing or activation, usually given in minutes at a specified temperature, often 20 °C. With reactive resins, the chemical reaction also continues in the mixing container, and larger quantities or higher temperatures can shorten this time. Working time is different from gel time and full curing time.
VOC content (volatile organic compounds) indicates the amount of these substances in a product, usually expressed in g/L (grams per litre). They may evaporate during application and drying. The value describes the composition, but actual exposure also depends on how much is used, ventilation and the application method.
Read the warnings and use appropriate protective equipment before handling the product.
UFI: 61S0-90Q6-Y00X-WM0
Useful additions for your project.