Araldite 2012 Epoxy Adhesive
- Strong 2-component epoxy adhesive
- Quick-curing
- In handy double syringe
Araldite 2012 is the faster-curing version of Araldite 2011. This two-component epoxy adhesive has a low viscosity, cures quickly and provides a strong, resilient bond. Thanks to its excellent adhesion to a wide range of materials, Araldite 2012 is suitable for most industrial applications, including metals, plastics, ceramics, glass and rubber.
Features Araldite 2012 Epoxy Adhesive
- Fast curing and high strength.
- Low shrinkage and excellent impact resistance.
- Strong and resilient.
- Bonds a wide variety of materials.
Applications
Araldite 2012 is suitable for bonding the following materials:
- Ferrous metals and aluminium, copper, zinc and galvanised products.
- Polystyrene/polyurethane foams.
- Ceramics, wood, fibre-reinforced plastics and epoxy resins.
- Fibre-reinforced polyester and thermoset composites, acrylics and polycarbonate.
- Rubbers and glass/quartz/gemstones.
- Excellent for use with dynamic loads.
- Bearings, electronic components and printed circuit boards.
- Encapsulation of sensors.
- Grinding stones.
Specifications
Colour: yellow
Mixing ratio: 1:1
Specific gravity: 1.05 g/cm3
Shear strength: 19 N/mm2
Peel strength: 5 N/mm
Viscosity: 35.000 mPa.s
Gap-filling capacity: up to 1 mm
Temperature resistance: -60°C to +100°C
Minimum curing time for initial strength: 20 minutes for 1 N/mm2 on aluminum at 23°C
Packaging:
- 50 ml cartridge (application gun and mixing tubes required)
- 200 ml cartridge (application gun and mixing tubes required)
Application gun:
Mixing tubes:
When used with the correct application gun and mixing tubes, Araldite 2012 is ready for immediate use.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
Safety equipment
Waarschuwing
| Code | Description |
|---|---|
| H315 | Causes skin irritation. |
| H317 | May cause an allergic skin reaction. |
| H319 | Causes serious eye irritation. |
| H411 | Toxic to aquatic life with long lasting effects. |
| P261 | Avoid breathing dust/fume/gas/mist/vapours/spray. |
| P264 | Wash hands thoroughly after handling. |
| P273 | Avoid release to the environment. |
| P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
| P391 | Collect spillage. |
| P333+P313 | If skin irritation or rash occurs: Get medical advice/attention. |
| P337+P313 | If eye irritation persists: Get medical advice/attention. |
| EUH205 | Contains epoxy constituents. May produce an allergic reaction. |
