Araldite 2013-2 Epoxy Paste Adhesive

View reviews

At a glance

Metal coloured epoxy adhesive
For metal, plastic and wood
In handy double syringe

Not sure about your choice?

Want to know which Araldite adhesive you need? Use our selection tool!

Fast delivery throughout Europe

Secure payment with PayPal, Mastercard, Visa and more

4.7 out of 5 stars on Trusted Shops

Araldite 2013-2 is the successor to Araldite 2013-1. In response to new European regulations, the manufacturer has reformulated this adhesive to eliminate CMR substances and BPA. The properties, handling characteristics and performance of the adhesive remain unchanged. An equivalence report can be found under the 'Documents' tab.

Araldite 2013-2 epoxy adhesive is a metal-coloured, paste-like adhesive. This two-component adhesive cures at room temperature and offers high strength and excellent toughness. The thixotropic epoxy adhesive also provides excellent chemical and water resistance. Although it is primarily designed as a metal adhesive, it is also suitable for bonding materials such as ceramics, glass, rubber and rigid plastics. Its thixotropic consistency also makes it suitable for vertical applications.

Tip: don't forget to order the correct application gun and compatible mixing nozzles.

Features of Araldite 2013-2 epoxy adhesive

Metal-coloured epoxy adhesive.
Heat-resistant up to 80 °C.
Impact-resistant with low shrinkage.
Suitable for vertical applications.
Excellent chemical resistance.
Good resistance to heat and water.

Applications

Araldite 2013-2 is suitable for the following materials and applications:

Vertical surfaces.
Ferrous metals, aluminium, copper, zinc and galvanised metals.
Glass fibre-reinforced plastics and cured epoxy resins.
Fibre-reinforced polyester.
Thermoset composites.
Polystyrene foam.
Polyurethane foam.
Various rubber types.
Wood.

Specifications

Colour: grey / metal-coloured
Mixing ratio: 1:1
Density: 1.2 g/cm³
Shear strength: 18 N/mm²
Peel strength: 4 N/mm
Viscosity: thixotropic
Working time: approx. 2 hours (23 °C)
Curing time: approx. 6 hours (23 °C)
Gap-filling capacity: up to 4 mm
Temperature resistance: -40 °C to +80 °C
Time to reach initial strength: 4 hours to achieve 1 N/mm² on aluminium at 23 °C
Packaging: 50 ml dual cartridge (application gun and mixing nozzles required)
Application gun: LS50-1 (50 ml)
Mixing nozzle: nozzle C (50 ml)

Araldite 2013-2 is quick and easy to apply using the appropriate application gun and mixing nozzles.

Product properties

The key technical properties clearly listed in one place.

Article number: LIJ000194
: Epoxylijm
: Up to 4 mm
Colour: Gray
: meer dan 60 minuten
: Koper, Aluminium, Verzinkt staal, Glas/Epoxy (GRE), Koolstof/Epoxy (CFRP), Polystyreenschuim (EPS/XPS), Polyurethaanschuim (PUR/PIR), Rubber, Hout, SMC, Messing
: 4 hours (for 1 N/mm² on aluminium at 23 °C)
: 4 N/mm
: 18 MPa
: 1.2 kg/L
: Approximately 6 hours (at 23 °C)
Net contents: 50 ml
: Approximately 120 minutes (at 23 °C)
: Thixotropic
: -40 to 80 °C

Safety information

Read the warnings and use appropriate protective equipment before handling the product.

Gevaar

Recommended protective equipment

Hazard pictograms

Warnings and precautions

H315 Causes skin irritation.

H317 May cause an allergic skin reaction.

H318 Causes serious eye damage.

H319 Causes serious eye irritation.

H332 Harmful if inhaled.

H361 Suspected of damaging fertility or the unborn child <state specific effect if known> <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.

H411 Toxic to aquatic life with long lasting effects.

P201 Obtain special instructions before use.

P273 Avoid release to the environment.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P310 Immediately call a POISON CENTER/doctor/…

P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P405 Store locked up.

P501 Dispose of contents/container in accordance with in accordance with local regulation

EUH205 Contains epoxy constituents. May produce an allergic reaction.