Araldite 2014-2 Epoxy Adhesive

View reviews

At a glance

Grey 2-component epoxy adhesive
Kiwa Water Mark
Safe to use

Not sure about your choice?

Want to know which Araldite adhesive you need? Use our selection tool!

Fast delivery throughout Europe

Secure payment with PayPal, Mastercard, Visa and more

4.7 out of 5 stars on Trusted Shops

Araldite 2014-3 is the successor to Araldite 2014-2. In response to new European regulations, the manufacturer has reformulated this adhesive to eliminate CMR substances and BPA. The properties, handling characteristics and performance of the adhesive remain unchanged compared with the previous version. An equivalence report can be found under the 'Documents' tab.

Araldite 2014-3 is a grey, paste-like epoxy adhesive with excellent resistance to chemicals and high temperatures. This two-component epoxy adhesive is Kiwa-certified under certificate number K22770, making it suitable for applications involving contact with drinking water.

Tip: do not forget to order the appropriate application gun and mixing nozzle.

Features of Araldite 2014-3 epoxy adhesive

Excellent resistance to chemicals, heat and water.
Low shrinkage.
Impact resistant.
Suitable for applications that come into contact with drinking water.

Applications

Araldite 2014-3 is suitable for bonding the following materials:

Ferrous metals, aluminium, copper, zinc and galvanised materials.
Glass fibre-reinforced plastics and epoxy resins.
Fibre-reinforced polyester.
Thermoset composites.
Ceramics.
Wood.

Specifications

Colour: grey
Mixing ratio: 2:1
Density: 1.6 g/cm³
Shear strength: 19 N/mm²
Peel strength: 3 N/mm
Viscosity: thixotropic
Gap-filling capacity: up to 4 mm
Working time: 30-60 minutes
Temperature resistance: -60 °C to +140 °C
Minimum time to reach initial strength: 3.5 hours to achieve 1 N/mm² on aluminium at 23 °C
Packaging:

50 ml dual cartridge (application gun and mixing nozzle required)
200 ml dual cartridge (application gun and mixing nozzle required)
380 ml dual cartridge (application gun and mixing nozzle required)

Application gun:

Mixing nozzles:

Araldite 2014-3 is quick and easy to apply using the appropriate application gun and mixing nozzle.

Product properties

The key technical properties clearly listed in one place.

Article number: LIJ000195
: Epoxylijm
: Up to 4 mm
Colour: Gray
: 30 tot 60 minuten
: Staal, Roestvast staal (RVS), Aluminium, Koper, Messing, Glas/Epoxy (GRE), Glas, Hout
: 3.5 hours (for 1 N/mm² on aluminium at 23 °C)
: 3 N/mm
: 19 MPa
: 1.6 kg/L
Net contents: 50 ml
: Thixotropic
: -60 to 140 °C

Safety information

Read the warnings and use appropriate protective equipment before handling the product.

Gevaar

Recommended protective equipment

Hazard pictograms

Warnings and precautions

H315 Causes skin irritation.

H317 May cause an allergic skin reaction.

H318 Causes serious eye damage.

H411 Toxic to aquatic life with long lasting effects.

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.

P273 Avoid release to the environment.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P310 Immediately call a POISON CENTER/doctor/…

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].

P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P333+P313 If skin irritation or rash occurs: Get medical advice/attention.

P362+P364 Take off contaminated clothing and wash it before reuse.

P501 Dispose of contents/container in accordance with in accordance with local regulation

EUH205 Contains epoxy constituents. May produce an allergic reaction.

Reviews

Useful additions for your project.

Recommended

Nitrile gloves

€ 3,⁹⁹

inc. VAT

Application gun LS50-1

€ 32,⁹⁸