Araldite 2014-2 Epoxy Adhesive
- Grey 2-component epoxy adhesive
- KIWA Water Mark
- In handy double syringe
Araldite 2014-2 is a grey, paste-like epoxy adhesive with excellent chemical and thermal resistance. This two-component epoxy adhesive is approved by KIWA under certificate number K22770, making it suitable for applications that come into contact with drinking water.
Features of Araldite 2014-2 epoxy adhesive
- Excellent resistance to chemicals, heat and water.
- Low shrinkage.
- Impact resistant.
- Suitable for applications that come into contact with drinking water.
Applications
Araldite 2014-2 is suitable for bonding the following materials:
- Ferrous metals, aluminium, copper, zinc and galvanised materials.
- Glass fibre-reinforced plastics and epoxy resins.
- Fibre-reinforced polyester.
- Thermoset composites.
- Ceramics.
- Wood.
Specifications
Colour: grey
Mixing ratio: 2:1
Specific gravity: 1.6 g/cm3
Shear strength: 19 N/mm2
Peel strength: 3 N/mm
Viscosity: thixotropic
Gap-filling capacity: up to 4 mm
Open time: 30-60 minutes
Temperature resistance: -60°C to +140°C
Minimum curing time for initial strength: 3.5 hours for 1 N/mm2 on aluminium at 23°C
Packaging: 50 ml double cartridge (application gun and mixing tubes required)
Application gun: handgun LS50-1 (50 ml)
Mixing nozzle: mixing nozzle A (50 ml)
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
