RESION Gelcoat (special color request)
- For special color requests
- Very fast delivery
- For use in moulds
In addition to RAL colours, RESION's ISO-NPG Topcoat is also available in various other colour spectrums, such as colours from NCS, Sikkens and Sigma. Do you have a specific colour in mind? Enter the desired colour number for this product and we will ensure that it is custom-made for you!
Polyester Gelcoat
Gelcoat is a polyester prepaint that protects glass fibres from moisture and provides a gloss layer. Gelcoat is used in moulds and is available by colour. It evens out relief and makes the glass fibres stick. This RESION brand gelcoat has very good resistance to water, chemicals and heat. In addition, the coating combines well with all polyester laminating resins and polyester topcoats.
Properties
You need a hardener to use the coloured gelcoat. The table below lists the hardener required per quantity of gelcoat.
| Gelcoat | Hardener |
| 5 kg | 100 ml hardener |
| 25 kg | 500 ml hardener |
Gelcoat always sticks to the evaporation side. If you want to avoid this, you should use the polyester topcoat. We also sell complete gelcoat repair sets for small repairs.
MEKP-Hardener: approx. 2%
Usage: approx. 400 gr/m²
Size: 5 kg, 25 kg
Processing time: 20 minutes (at 20 degrees)
Shelf life: 3 to 6 months Hardening time: approx. 2 hours
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
