Topcoat on colour
- Available in all RAL colours
- Cures tack-free
- Perfect for polyester repairs
Use polyester topcoat in RAL colours to finish your polyester product. This polyester topcoat gives a silk-gloss finish with a slight structure. If desired, the polyester topcoat can be sanded flat and polished to a high gloss. Polyester topcoat is highly resistant to water, chemicals and temperature. This makes polyester topcoat extremely suitable for your boat or pond.
We supply topcoat in all RAL colours. If you choose your desired colour, we will deliver the topcoat pre-coloured to your home.
For swimming pools, we recommend the special topcoat for swimming pools, available in colours such as YT151 (light blue) and YT153 (azure blue). These colours are stable in chlorinated water.
How to process polyester topcoat
Lightly sand the polyester surface and clean it with acetone. Then add 2% hardener and mix the polyester topcoat well. When working with topcoat, always use latex gloves and a fume mask. After the topcoat is mixed well, you have a processing time of about 20 minutes at room temperature. Now apply the topcoat with a fleece paint roller and use a paint brush for hard-to-reach areas. Then let the topcoat cure.
Product properties
MEKP-hardener: approx. 2%
Consumption: approx. 300-400 gr/m²
Packaging: 1 kg, 5 kg, 25 kg
Processing time: 20 minutes (at 20 degrees)
Shelf life: 3 to 6 months
Dust dry: after approx. 15 minutes
Fully hardened: after 2 hours
Can be repainted: after 2 hours
Below is an overview of the quantity of hardener required per quantity of topcoat:
| Base (PR21) | Hardener |
| 1 kg | 20 ml hardener |
| 5 kg | 100 ml hardener |
| 25 kg | 500 ml hardener |
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
Polyester Topcoat RAL 1000 groenbeige - 1 kg
Safety equipment
Gevaar
| Code | Description |
|---|---|
| H226 | Flammable liquid and vapour. |
| H315 | Causes skin irritation. |
| H319 | Causes serious eye irritation. |
| H335 | May cause respiratory irritation. |
| H361 | Suspected of damaging fertility or the unborn child <state specific effect if known> <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>. |
| H372 | Causes damage to organs <or state all organs affected, if known> through prolonged or repeated exposure <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P210 | Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. |
| P260 | Do not breathe dust/fume/gas/mist/vapours/spray. |
| P303+P361+P353 | IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. |
| P305+P351+P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| P405 | Store locked up. |
| P501B | Dispose of contents/container in accordance with in accordance with local regulation |
- Polyester for beginners
- Polyester pond making | DIY
- Polyester repair manual
- Covering an object with polyester
- Repairing a rotten (balsa)core
- This is how you repair a polyester camper roof!
- Mixing ratios and mixing of Epoxy and Polyester
- Waterproofing walls and floors
- How do you make colour matching gelcoat?
- Boat repair and restoration
- Repairing gelcoat spider cracks in a polyester boat
- How to waterproof a wooden hot tub.
- Building a new floor in the boat with polyester
- Repairing a plastic shower tray with polyester or epoxy
- Repairing boat mirror with polyester
- What boat paint do you need? The right paint system for your boat!
- Do it yourself jobs with epoxy (DIY), polyester and PU foam!
