Hydroflow Sealer (Aqua-Cast Sealer)
- Sealer for Aqua-Cast
- Silk gloss or matt gloss
- Eco-friendly formula
Hydroflow Sealer is a water-based polyurethane coating for the protection of Aqua-Cast castings. Once the sealer has cured, the casting is protected against staining. The sealer is developed based on an environmentally friendly polyurethane formula and is easy to use.
Hydroflow Sealer is available as eggshell finish (matt gloss) and satin finish (silk gloss).
Benefits of Hydroflow Sealer
- Sealer for Aqua-Cast.
- Easy-to-use spray bottle.
- Environmentally friendly polyurethane formula.
Instructions for use of Hydroflow Sealer
Shake the bottle well before use and make sure all surfaces are clean and dry. Apply Hydroflow Sealer to a fully cured casting and allow the product to soak in with a sponge.
For optimal protection, we recommend applying at least three coats. Wait 1-2 hours before applying another coat. Depending on the use of the casting, it may be necessary to apply a new coat. The Hydroflow sealer is completely dry after 12-18 hours.
Contents: 200 ml
Gloss: matt (eggshell finish), silk (satin finish)
Dust-dry: 1-2 hours
Fully cured: 12-18 hours
Shelf life: indefinitely
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.