Aqua Cast White acrylic resin

Aqua Cast is an eco-friendly acrylic resin that you can easily process in combination with water. Through a unique formula, acrylic polymer additives are fused into one ground-breaking powder. All the properties of a traditional acrylic remain the same. Aqua Cast therefore hardens rock-hard, is easy to use and cures at lightning speed.

With Aqua Cast, you can make beautiful plaster-look figurines, coasters, jewellery and beautiful art. You can compare this product with Acrystal, Porcelain Plaster, Acrylic One and Jesmonite.

Benefits of Aqua Cast

• Environmentally friendly.
• Suitable for use in any silicone mould.
• Fireproof.
• Fast curing.
• Suitable for making terrazzo.

Aqua Cast pigments

With Resi-Tint Acrylic pigments, you can give Aqua Cast any colour you like. The acrylic pigments are easy to use and available in 19 beautiful colours.

Directions for use

Aqua Cast polymer is easy to use. To do so, follow the following steps:

• Weigh the desired amount of Aqua Cast powder on a (digital) scale.
• Then weigh the right amount of water according to the mixing ratio (100:35, 100 grams of powder and 35 ml of water).
• Slowly add the powder to the water and mix well for 2-4 minutes until lump free.
• Pour the mixture directly into the desired silicone mould and tap/shake the mould to remove any air bubbles.
• Allow to harden for 60-90 minutes before removing from the mould.
• After 1-2 days, the Aqua Cast is fully cured.

Specifications

Packaging: 3 kg, 10 kg, 15 kg, 25 kg
Colour: white
Mixing ratio: 100:35 (weight)
Open time: 10-15 minutes (at 23℃)
Cured: 60-90 minutes
Full cure: 24 to 48 hours
Shelf life: infinite (if stored dry)
Mixing table: