Popular
International Propeller Primer
At a glance
- Primer for screws etc.
- 1-component primer
- Quick-drying and low odour
Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops
Product description
International Prop Primer (Propeller Primer) is a 1-component primer specially formulated for use on propellers, saildrives, stern drives and tailpieces. The Prop Primer is fast drying, easy to apply with a brush and has excellent adhesion properties thanks to DualActivated Bonding Technology.
International Propeller Primer works well in combination with Interspeed Extra antifouling by International. This creates a coordinated paint system that resists cavitation forces and protects propellers and other underwater metal from fouling.
International's fast-drying 1-component primer is suitable for use on all surfaces, including primed aluminium/light metal and zinc-sprayed surfaces.
Benefits of Propeller Primer
- Propeller Primer performs best when used with a recommended International antifouling.
- Excellent adhesion properties to various metal parts underwater.
- Easy to apply with a brush.
- Low odour (VOC<20g/l).
Specifications
Contents: 0.25 L
Colour: red
Finish: matt
Application method: brush
Recommended number of coats: 1-2
Volume solids: 46%
Shelf life: 2 years
VOC: 17 g/L
Minimum processing temperature: 10°C (max. 35°C)
Suitable antifouling: International Interspeed Extra
Coverage:
Theoretical: 10 m2/L
Practical: 9 m2/L
Tip: for more information on storage, pretreatment and other details, please refer to the technical documentation of Prop Primer.
Product properties
The key technical properties clearly listed in one place.
- Article number
- BOO001058
-
The materials, substrates or tasks a product is intended for. A general claim such as 'suitable for plastics' does not mean it works with every type of plastic; the specific substrate and its preparation still matter.
- Polyester boten, Stalen-boten, Aluminium boten, Houten boten
-
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
- 1K Primer
-
The recommended number of coats needed to achieve the intended coverage, thickness or protection. Highly absorbent substrates or different application methods may require additional coats. Allow for the specified time between coats.
- 1-2 coats
-
The period for which an unopened product remains usable under the specified storage conditions. Check whether the period starts from the manufacturing date or another date. Shelf life may be shorter after opening, especially for products sensitive to air or moisture.
- 24 months
-
Minimum application temperature is the lowest temperature at which a product may be used according to the manufacturer. The limit can apply to the air, substrate and product itself.
At lower temperatures, resins and coatings can become thicker and cure more slowly. Moisture can also condense on a cold substrate and reduce adhesion. Check the dew point and measure the surface temperature before starting. A longer drying time does not automatically make application below the specified minimum acceptable.
- 10 °C
-
Solids content is the proportion of material remaining after volatile components have evaporated from a coating. It is stated as a percentage by weight or by volume (%); these are not interchangeable. Volume solids content helps estimate dry film thickness: with 60% volume solids, a 100 µm wet film will theoretically produce approximately 60 µm of dry film.
- Approximately: 46%
- Net contents
- 250 ml
-
The application or processing methods specified by the manufacturer, such as brushing, rolling, spraying, casting or hand laminating. The chosen method can affect consumption, layer thickness and finish.
- Brush
-
VOC content (volatile organic compounds) indicates the amount of these substances in a product, usually expressed in g/L (grams per litre). They may evaporate during application and drying. The value describes the composition, but actual exposure also depends on how much is used, ventilation and the application method.
- 17 g/L
Reviews
Frequently bought together
Useful additions for your project.
Recommended
