Tercoo Multi
- 8 discs
- For steel substrates
- For professional jobs
Tercoo Multi is a rotating disc designed for the removal of rust, paint, tar, epoxy, filler, adhesive residues, and similar contaminants from a variety of materials. It is ideal for use on steel, iron, concrete, stone, and similar surfaces.
For mechanical treatment of steel surfaces larger than 30 m², we recommend using the Tercoo Multi. The Tercoo Multi consists of eight discs mounted on a hexagonal shaft with an M12 internal thread. It is perfect for semi-professional and professional use, particularly in areas where blasting is undesirable or prohibited.
Benefits of the Tercoo Multi
- Easy to use.
- 8 discs for treating surfaces from 30 m².
- Rapidly removes a variety of materials.
- Suitable for semi-professional use.
How does the Tercoo Multi work?
The Tercoo Multi is a natural rubber disc equipped with 12 carbide pins. The pins are positioned at a specific angle relative to the centre, causing them to be pushed outward by centrifugal force. Because the natural rubber disc is flexible, it retracts the carbide pins, creating a pendulum-like motion. This motion causes the carbide pins to hammer the surface being cleaned, effectively removing all contaminants and previously applied protective layers. Thanks to the hammering action, no heat is generated, making it easy to remove tough materials such as tar, glue, and sealant. Unlike tools that generate friction during use, the Tercoo discs will clean any contamination effectively, every time!
Specifications
Number of discs: 8
Material: natural rubber
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
