White roofing material (Impermax LY)

White roofing material (Impermax LY)
White roofing material (Impermax LY)
  • 1-component roofing material
  • Ideal for solar panels
  • Colour: white

Impermax LY is a white-coloured liquid waterproofing roofing material. The product gives an elastomeric and waterproof polyurethane membrane on roofs, balconies and terraces. The yield of Impermax LY is usually 1kg/m2, depending on the layer thickness.

The white roofing material retains less heat and reflects sunlight. Solar panels therefore perform better at lower temperatures. The efficiency increases by a few percent to 10%. The ideal roofing material for solar panels!

Benefits of Impermax LY

  • Easy to apply with roller and brush.
  • Increases efficiency of solar panels at lower temperatures.
  • The material adheres completely to the substrate, so there is no need to nail, burn or glue the roofing material.
  • Leaks or damage are easy to locate and repair.
  • Easy to create and work on difficult details and shapes such as sloping edges, roof penetrations, skylights.
  • Minimal fire risk because you are not working with open flames.
  • Quickly waterproofed, almost immediately rainproof.


This white roofing material ican be used on several types of surfaces (concrete, brick, fibrous cement, ceramic tiles, bituminous, steel, zinc, aluminum). Impermax LY is suitable for the following applications:

  • Roofs, balconies and terraces.
  • Baths (showers), kitchens and difficult access spots.
  • Floors with light pedestrian traffic.
  • Stairs, stadiums, stands.

Instructions for use

Impermax LY is easy to use. Follow the instructions below. For optimal adhesion, we recommend working on a level surface, free from dust, loose particles, oil, etc. Cracks should also be repaired first. 

  • Open the package and mix the contents with a spiral mixer until a homogeneous mass is obtained.
  • Let the product rest for a while to allow air bubbles to escape (dilution is not necessary).
  • Apply the liquid roofing material with a roller, brush or sprayer (the consumption is 1kg/m2).
  • Then allow the roofing membrane to cure for at least 4-8 hours. The curing time depends on the environmental conditions. Check the technical documentation for an overview of the recommended curing time of Impermax LY.

Under normal conditions, the membrane reaches 90% of its full properties in 3 days. After 1 or 2 days, the product is walkable but the final hardness is reached after 10 or 15 days. We recommend this time be taken into account before the roof is loaded with water.

Product properties

Contents: 6 kg, 25 kg
Colour: white (can yellow over the years)
VOC content: 314 g/l
Viscosity: 15.000 mPa.s (20°C)
Processing time: 4-6 hours (20°C)
Curing time: 4-8 hours
Processing temperature: 0-30°C
Hardness: Shore 60-65A 
Maximum elongation: 402%
Consumption: approx. 1kg/m2

We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.

Safety equipment


Code Description
H226 Flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H373B May cause damage to organs through prolonged or repeated exposure by inhalation.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P314 Get medical advice/attention if you feel unwell.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor/…
P405 Store locked up.
P501B Dispose of contents/container in accordance with in accordance with local regulation
MDI As from 24 August 2023 adequate training is required before industrial or professional use

Product Choices

64,99 64,99
Contents Price

Receive a back in stock email.

  • Extensive range!
  • PayPal, Mastercard, Visa, American Express
  • Fast reliable delivery in Europe (1-5 days)
  • Free advice from a specialist!
Product advisor

We will be happy to give you advice!

Volume related prices

You order Your price You save
5 Pieces € 63,37 € 8,10
10 Pieces € 61,74 € 32,50
15 Pieces € 60,12 € 73,05