Epifanes Black Matt Finish
At a glance
- One-component matt topcoat
- Excellent abrasion resistance
- Resists chemicals & alcohol
Product description
Epifanes Black Matt Finish is a one-component (1K) black matt topcoat based on a urethane-alkyd resin, specially developed for boats and yachts. This matt marine paint offers excellent abrasion resistance and outstanding protection against alcohol and household chemicals, while providing a smooth, even finish. Thanks to its matt finish (10% gloss), this coating is ideal for creating a sleek, contemporary interior or exterior without a high-gloss finish.
Why choose Epifanes Black Matt Finish?
- One-component matt topcoat.
- Suitable for interior and exterior use.
- Excellent abrasion resistance.
- Resistant to chemicals and alcohol.
- Smooth, even finish.
Applications of Epifanes Black Matt Finish
This black matt paint is suitable for a wide range of applications on boats and yachts:
- Interior
Suitable for application over a suitable primer and/or existing topcoat layers on polyester, wood, steel and aluminium.
- Exterior
As a decorative finishing coat over a complete protective paint system (primer + high-gloss topcoat) above the waterline.
- Existing paint systems
Ideal for maintaining well-adhering one-component and two-component paint systems above the waterline.
Specifications
Contents: 750 ml
Gloss level: matt (10%)
Colour: black
Primer: Epifanes Multi Marine Primer (1-3 coats)
Recommended film thickness: 60-70 µm wet = 35-50 µm dry
Coverage: 9 m2 per litre
Dust dry: after 30 minutes (20°C)
Sandable: after 12 hours (20°C)
Recoatable: after 12 hours (20°C)
Application temperature: 10°C-28°C
Density: 920 g/dm3
VOC content: 440 g/l
Brush thinner: Epifanes Brush Thinner
Spray thinner: Epifanes 1C Spray Thinner
Shelf life: at least 3 years from the production date when stored in its original, unopened packaging at temperatures between 5°C and 30°C.
Questions about Epifanes Black Matt Finish?
Do you have any questions about this matt marine paint or would you like to know more about how to use it? No problem – we’re happy to provide honest, expert advice. Feel free to contact our specialists by email or WhatsApp. Order your Epifanes Black Matt Finish before 5:00 pm CET, and we’ll dispatch your order the same day!
Product properties
The key technical properties clearly listed in one place.
- Article number
- LAK002364
-
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
- 1K paint, Finish coat
-
Gloss level indicates how much light a dry paint or coating reflects and how the finished surface looks.
- Matt: little reflection and a subdued appearance.
- Satin: a gentle sheen between matt and high gloss.
- High gloss: stronger reflections and a more pronounced colour, although surface imperfections may become more visible.
Gloss can be measured in gloss units (GU) at a specified angle. Terms such as matt and satin do not necessarily mean exactly the same thing across manufacturers. Substrate condition and application also affect the final appearance.
- Matte
-
The recommended layer thickness is the thickness at which you apply each coat of paint, coating or resin. It is usually given in micrometres (µm) or millimetres (mm).
- Wet film thickness: the thickness immediately after application.
- Dry film thickness: the thickness after drying or curing.
For a coating with 60% solids by volume, a wet film of 100 µm will theoretically produce a dry film of approximately 60 µm. Film thickness affects coverage, protection and drying. Always check whether the manufacturer specifies wet or dry film thickness.
- 60-70 µm wet (= 35-50 µm dry)
-
The recommended application temperature range indicates the conditions under which the product can generally be applied and cured properly. Three temperatures matter:
- Air: the temperature in the workshop or outdoors.
- Substrate: the temperature of the surface being treated.
- Product: the temperature of the resin, adhesive or coating itself.
A cold substrate can cause condensation and affect adhesion. At higher temperatures, two-component products may react faster, reducing their working time. Check the dew point and follow the product instructions.
- 10-28 °C
-
Density describes the mass of a material per unit volume. Values may be given in g/cm³, kg/L or kg/m³; 1 g/cm³ equals 1 kg/L. For example, one litre of a liquid with a density of 1.2 kg/L weighs approximately 1.2 kg. Density helps convert between weight and volume, but it can vary with temperature.
- 920 g/dm³
-
The period for which an unopened product remains usable under the specified storage conditions. Check whether the period starts from the manufacturing date or another date. Shelf life may be shorter after opening, especially for products sensitive to air or moisture.
- At least 36 months
-
The overcoating interval tells you when the next layer of paint, varnish or coating may be applied. Many multi-coat systems specify both a minimum and a maximum interval:
- Minimum overcoating time: the previous layer is dry or cured enough to accept another coat.
- Maximum overcoating time: the period during which the next coat can bond without extra surface preparation under the stated conditions.
Overcoating too early can affect drying or the finish. Once the maximum interval has passed, cleaning and sanding may be needed to ensure adhesion between coats. Temperature and film thickness affect the waiting times.
- 12 hours (20 °C)
-
A primer or suitable surface preparation helps the next product bond properly to the substrate. Different surfaces require different treatments:
- Porous substrates such as some concrete floors may need impregnation or priming to reduce absorption and bind loose dust.
- Non-porous or smooth substrates such as certain tiles may need sanding or a specialist adhesion primer.
- Metal and existing paintwork may require their own cleaning, sanding and priming system.
Remove dirt, grease and loose material. Also check the substrate's moisture level and whether the primer is suitable for both the substrate and finishing coat.
- Epifanes Multi Marine Primer (1-3 coats)
-
The waiting time before an applied layer is dry or hard enough to sand without smearing or damage. Sanding too early can also clog the abrasive quickly. Layer thickness and temperature affect this time.
- 12 hours (20 °C)
-
A paint or varnish layer is dust-dry when settling dust is less likely to stick to the surface. It may not yet be touch-dry, ready for overcoating or suitable for loading; these are different stages of drying and curing.
- 30 minutes (20 °C)
-
Consumption or coverage describes how much product is needed for a given surface area. Consumption may be stated in g/m² or kg/m², while coverage is often given in m²/L or m²/kg. A consumption of 0.2 kg/m² means a theoretical 200 grams per square metre. Actual use depends on film thickness, substrate absorbency, application method and waste.
- 9 m²/L
-
A specific thinner that can be used, where permitted, to adjust a product's application properties or viscosity. The correct thinner and maximum quantity depend on the product. Incorrect thinning can affect coverage, drying and curing.
- Brush: Epifanes Brush Thinner, Spray: Epifanes 1C Spray Thinner
- Net contents
- 750 ml
-
VOC content (volatile organic compounds) indicates the amount of these substances in a product, usually expressed in g/L (grams per litre). They may evaporate during application and drying. The value describes the composition, but actual exposure also depends on how much is used, ventilation and the application method.
- 440 g/l