Araldite 2013-2 Epoxy Paste Adhesive
- Metal coloured epoxy adhesive
- For metal, plastic and wood
- In handy double syringe
Araldite 2013-2 Epoxy Adhesive is a metal-coloured, paste-like adhesive. This two-component adhesive cures at room temperature and offers high strength and toughness. The thixotropic epoxy adhesive also provides excellent chemical and water resistance. Although it is primarily designed as a metal adhesive, it is also suitable for bonding materials such as ceramics, glass, rubber and rigid plastics. Thanks to its thixotropic consistency, Araldite 2013-2 is also ideal for vertical applications.
Features of Araldite 2013-2 Epoxy Adhesive
- Metal-coloured epoxy adhesive.
- Heat resistant up to 80°C.
- Impact resistant with low shrinkage.
- Suitable for vertical applications.
- Excellent chemical resistance.
- Good resistance to heat and water.
Applications
Araldite 2013-2 is suitable for bonding the following materials and applications:
- Vertical surfaces.
- Ferrous metals, aluminium, copper, zinc and galvanised metals.
- Fibre-reinforced plastics and epoxy resins.
- Fibre-reinforced polyester.
- Thermoset composites.
- Polystyrene foam.
- Polyurethane foam.
- Various types of rubber.
- Wood.
Specifications
Colour: grey / metal-coloured
Mixing ratio: 1:1
Specific gravity: 1.2 g/cm3
Shear strength: 18 N/mm2
Peel strength: 4 N/mm
Viscosity: thixotropic
Working time: approx. 2 hours (23°C)
Curing time: approx. 6 hours (23°C)
Gap-filling capacity: up to 4 mm
Temperature resistance: -60°C to +100°C
Time to initial strength: 4 hours for 1 N/mm2 on aluminium at 23°C
Packaging: 50 ml dual cartridge (application gun and mixing tubes required)
Application gun: LS50-1 (50 ml)
Mixing tube: tube A (50 ml)
Araldite 2013-2 is ready for immediate use when combined with the appropriate application gun and mixing tube.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
Safety equipment
Gevaar
| Code | Description |
|---|---|
| H315 | Causes skin irritation. |
| H317 | May cause an allergic skin reaction. |
| H318 | Causes serious eye damage. |
| H319 | Causes serious eye irritation. |
| H332 | Harmful if inhaled. |
| H361 | Suspected of damaging fertility or the unborn child <state specific effect if known> <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>. |
| H411 | Toxic to aquatic life with long lasting effects. |
| P201 | Obtain special instructions before use. |
| P273 | Avoid release to the environment. |
| P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
| P310 | Immediately call a POISON CENTER/doctor/… |
| P304+P340 | IF INHALED: Remove person to fresh air and keep comfortable for breathing. |
| P305+P351+P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| P405 | Store locked up. |
| P501 | Dispose of contents/container in accordance with in accordance with local regulation |
| EUH205 | Contains epoxy constituents. May produce an allergic reaction. |
