Araldite 2015-2 Epoxy Adhesive

View reviews

At a glance

Highly impact resistant
For GRP and SMC bonding
Safe to use

Not sure about your choice?

Want to know which Araldite adhesive you need? Use our selection tool!

Fast delivery throughout Europe

Secure payment with PayPal, Mastercard, Visa and more

4.7 out of 5 stars on Trusted Shops

Araldite 2015-2 is the successor to Araldite 2015-1. Due to new European regulations, the manufacturer has updated this adhesive to a CMR- and BPA-free formulation. The properties, processing, and performance of the adhesive remain identical to those of the previous version. An equivalence report can be found under the 'documents' tab.

Araldite 2015-2 is a strong, tough two-component epoxy adhesive that cures at room temperature. This thixotropic adhesive paste does not sag, even at bond line thicknesses of up to 10 mm, making it easy to apply on vertical surfaces. It is particularly suitable for bonding SMC and glass fibre-reinforced plastics (GRP), while also providing excellent adhesion between a wide variety of materials. The result is a durable, impact-resistant and reliable bond.

Tip: do not forget to order the appropriate application gun and suitable mixing nozzles.

Features of Araldite 2015-2 Epoxy Adhesive

Highly impact resistant.
Excellent resistance to chemicals, heat and water.
Ideal for bonding GRP, SMC and a wide range of substrates.
Gap-filling and non-sag up to a bond line thickness of 10 mm.
Temperature resistant up to 100 °C.

Applications

Araldite 2015-2 is suitable for bonding the following materials:

Ferrous metals, aluminium, copper, zinc and galvanised materials.
Fibre-reinforced polyester.
Thermoset composites.
Ceramics.
Glass fibre-reinforced plastics and epoxy resins.
Various types of rubber.

Specifications

Colour: beige
Mixing ratio: 1:1
Specific gravity: 1.4 g/cm³Shear strength: 17 N/mm²Peel strength: 5 N/mm
Viscosity: thixotropic
Gap-filling capacity: up to 10 mm
Open time: 30 to 35 minutes
Temperature resistance: -60 °C to +140 °C
Minimum curing time for initial strength: 4 hours for 1 N/mm² on aluminum at 23 °C
Packaging:

50 ml double cartridge (application gun and mixing nozzles required)
200 ml double cartridge (application gun and mixing nozzles required)
2 kg pack (no application gun and mixing nozzles required)

Application gun:

Mixing tubes:

Araldite 2015-2 is quick and easy to apply using the appropriate application gun and mixing nozzles.

Product properties

The key technical properties clearly listed in one place.

Article number: LIJ000196
: Epoxylijm
: Up to 10 mm
Colour: Lichtgeel
: 30-35 minutes
: Staal, Roestvast staal (RVS), Aluminium, Koper, Messing, Glas/Epoxy (GRE), Koolstof/Epoxy (CFRP), Glas, Hout
: 4 hours (for 1 N/mm² on aluminium at 23 °C)
: 5 N/mm
: 17 MPa
: 1.4 kg/L
: Approximately 7 hours (at 23 °C)
Net contents: 50 ml
: Thixotropic
: -60 to 100 °C

Safety information

Read the warnings and use appropriate protective equipment before handling the product.

Gevaar

Recommended protective equipment

Hazard pictograms

Warnings and precautions

H314 Causes severe skin burns and eye damage.

H315 Causes skin irritation.

H317 May cause an allergic skin reaction.

H318 Causes serious eye damage.

H411 Toxic to aquatic life with long lasting effects.

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.

P264 Wash hands thoroughly after handling.

P273 Avoid release to the environment.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P310 Immediately call a POISON CENTER/doctor/…

P391 Collect spillage.

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].

P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P501 Dispose of contents/container in accordance with in accordance with local regulation

EUH205 Contains epoxy constituents. May produce an allergic reaction.

Reviews

Useful additions for your project.