Araldite 2028-1 Polyurethane Adhesive
- Transparent PU adhesive
- Bonds polycarbonate + plexiglass
Araldite 2028-1 is a fast curing transparent 2-component polyurethane adhesive with good UV resistance.
Features Araldite 2028 PU adhesive
- Flexible adhesive.
- Fast curing.
- Resistant to UV radiation.
Araldite 2028 is suitable for bonding the following applications:
- Fibre reinforced and thermoset composites.
- ABS, PVC.
- Polystyrene foams.
- Polyurethane foams.
- Various rubbers.
Packaging: 50 ml double cartridge (application gun and mixing tubes required)
Application gun: handgun LS50-1 (50 ml)
Mixing tube: mixing tube C (50 ml)
Specific gravity: 1.2g/cm2
Shear strength: 12 N/mm2
Peel strength: 1.2 N/mm2
Temperature resistance: -40°C to +80°C
Minimum curing time for initial strength: 15 min. for 1 N/mm2 at 23°C
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
|H317||May cause an allergic skin reaction.|
|H319||Causes serious eye irritation.|
|P261||Avoid breathing dust/fume/gas/mist/vapours/spray.|
|P272||Contaminated work clothing should not be allowed out of the workplace.|
|P280||Wear protective gloves/protective clothing/eye protection/face protection.|
|P333+P313||If skin irritation or rash occurs: Get medical advice/attention.|
|P337+P313||If eye irritation persists: Get medical advice/attention.|
|P362+P364||Take off contaminated clothing and wash it before reuse.|
|P501B||Dispose of contents / container in accordance with local, regional or international regulations|
|P264A||Wash hands thoroughly after handling.|
|EUH204||Contains isocyanates. May produce an allergic reaction.|