Tec7 Super
At a glance
- Cyanoacrylate adhesive
- Low viscosity and high adhesion
- For fast bonding and repair
Product description
Tec7 Super is a cyanoacrylate-based fast-curing adhesive. Because the adhesive is resistant to both very cold (-30°C) and very high temperatures (+100°C), it can be used for many projects. In addition, super-glued joints have a high resistance to shear forces and minimal shrinkage. Tec7 Super is easy to apply. Apply to a clean, dry, grease- and dust-free surface. The following applies to this adhesive: the thinner the adhesive layer, the stronger the bond. Press the components firmly together for a few seconds.
Benefits of Tec7 Super
- Low viscosity.
- High adhesion.
- For quick bonding and repair.
- Great power in a small bottle.
Applications of Tec7 Super
This adhesive is used for strong bonding of materials such as plastics (except for PE and PP), rubber, glass, acrylic (plexiglass), ceramic, wood, leather, metals, etc. Use Tec7 Super Aktivator when bonding porous materials.
Specifications
Contents: 10 ml, 20 ml
Base: cyanoacrylate
Form: drip bottle
Colour: colourless, transparent
Viscosity: liquid
Density: 1.05-1.09 kg/dm³
Flash point: 87°C
Consumption: 1 drop = +/- 0.02 g, sufficient for up to 3 to 5 cm² adhesive surface, 1 g = approximately 50 drops
Shelf life: 12 months in closed original packaging, store dry, cool and frost-free
Product properties
The key technical properties clearly listed in one place.
- Article number
- LIJ000649
-
Adhesive type describes the family of adhesive or sealant, such as epoxy adhesive, (methyl)methacrylate adhesive, polyurethane adhesive or polymer sealant. Its chemistry affects processing, curing, flexibility and adhesion. Products of the same type may still differ, so check the suitable substrates and application instructions.
- Acrylaatlijm
- Colour
- Transparant
-
The chemical base describes the chemistry of an adhesive, sealant, resin or coating, such as epoxy, polyester, polyurethane, (methyl)methacrylate or a hybrid polymer. It affects curing, flexibility and adhesion. Products with the same chemical base are not necessarily suitable for the same applications.
- cyanoacrylate
-
Density describes the mass of a material per unit volume. Values may be given in g/cm³, kg/L or kg/m³; 1 g/cm³ equals 1 kg/L. For example, one litre of a liquid with a density of 1.2 kg/L weighs approximately 1.2 kg. Density helps convert between weight and volume, but it can vary with temperature.
- 1.05-1.09 kg/dm³
-
The period for which an unopened product remains usable under the specified storage conditions. Check whether the period starts from the manufacturing date or another date. Shelf life may be shorter after opening, especially for products sensitive to air or moisture.
- 12 months
- Net contents
- 10 ml, 20 ml, 50 ml
-
Viscosity measures how easily a liquid flows, or how thick it is. Dynamic viscosity is usually expressed in mPa·s (millipascal-seconds), sometimes in cP (centipoise); 1 mPa·s = 1 cP. A lower value usually means a more free-flowing liquid, while a higher value indicates a thicker product. Temperature and test method strongly affect the value. Note that mPa·s is different from MPa, which is used to express mechanical strength.
- liquid
-
Flash point is the lowest temperature at which a liquid releases enough vapour, under specified test conditions, to ignite briefly in the presence of an ignition source. It is usually given in degrees Celsius (°C). Flash point is not the same as autoignition temperature and does not provide a complete assessment of the product's hazards.
- 87 °C
Safety information
Read the warnings and use appropriate protective equipment before handling the product.
Reviews
Frequently bought together
Useful additions for your project.