RESION Repair Compound PU Adhesive
- For repairing caravan floors
- Fast curing
- Compliant with RoHS and REACH
RESION Repair Compound PU Adhesive (formerly known as Permacol 5663) is a fluid, solvent-free, one-component polyurethane adhesive that cures upon exposure to moisture. This moisture may originate from the air or from the substrates being bonded. The curing speed depends on the moisture content, temperature, and the thickness of the adhesive layer.
- Higher moisture content → faster curing.
- Higher temperature → faster curing.
- Thicker adhesive layer → slower curing.
Features of RESION Repair Compound PU Adhesive
- Fast curing.
- Shock-resistant.
- Flexible.
- Water-resistant.
- Solvent-free.
- RoHS and REACH compliant.
Applications
This polyurethane adhesive is particularly suitable for bonding wood, rigid PVC, GRP, ABS, foamed polystyrene, PVC, PU, aluminum, steel, stainless steel, galvanised steel, concrete, stone and combinations, for example: sandwich panels, aluminum insulation panels on polystyrene, asphalt paper on polystyrene and chipboard on polystyrene. Permacol 5663 is often used for injecting caravan floors and is especially suitable for making (sea) water-resistant wood glue constructions (according to EN standard 204-D4, DIN 68602 B4).
Permacol 5663 is not suitable for: glass, polyethylene (PE), polypropylene (PP), polyamide (PA) and polytetrafluoroethylene (PTFE).
Directions for use
To properly apply Permacol 5663 PU Glue, please follow the instructions below:
- Roughen smooth surfaces for better adhesion.
- Make sure the substrates are clean and free from dust, water, grease, fingerprints, oil, etc.
- Sand metals to remove the oxide layer and then clean it thoroughly.
- Apply the adhesive to one side and spread the glue evenly over the surface.
- Press the parts firmly together as soon as possible.
- Allow the adhesive to cure for about 24-48 hours.
Specifications
Contents: 310 ml
Colour (cured): light yellow brown
Viscosity (23°C): 7,000 mPa.s
Density (23°C): 1.10 g/cm3
Application temperature: 15-20°C
Ambient humidity (working area): 50%
Wood moisture content: 8-16%
Application gun: sealant gun for cartridges
Open time: 30-60 minutes
Open time (thin layer): 20-25 minutes
Full cure: 24-48 hours
Solids content: 100%
Temperature resistance: -30°C to + 80°C
Consumption: approx. 200 g/m2
Storage stability at 23°C: 6 months in a well-closed original container
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
RESION Repair Compound | koker 310 ml
Safety equipment
Gevaar
| Code | Description |
|---|---|
| H315 | Causes skin irritation. |
| H317 | May cause an allergic skin reaction. |
| H319 | Causes serious eye irritation. |
| H332 | Harmful if inhaled. |
| H334 | May cause allergy or asthma symptoms or breathing difficulties if inhaled. |
| H335 | May cause respiratory irritation. |
| H373A | May cause damage to organs through prolonged or repeated exposure. |
| H351A | Suspected of causing cancer. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P201 | Obtain special instructions before use. |
| P260 | Do not breathe dust/fume/gas/mist/vapours/spray. |
| P314 | Get medical advice/attention if you feel unwell. |
| P308+P313 | IF exposed or concerned: Get medical advice/attention. |
| P405 | Store locked up. |
| P501B | Dispose of contents/container in accordance with in accordance with local regulation |
| EUH204 | Contains isocyanates. May produce an allergic reaction. |
