Tec7 Tec Gun sealant gun

- Ergonomic design
- High power transmission
- Long lifespan
The Tec Gun is used for squirting most products in the tube, irrespective of the viscosity, and even for two-part products with its 18:1 pump ratio. The Tec Gun has a pre-tensioning option to enable clean finishing and has a pressure rod in stainless steel with suspension hook.The tube Gun is ergonomic in use due to its perfect balance and a turning butt to keep the nozzle in the correct position.
Benefits of the Tec7 Tec Gun
- Ergonomic design
- High power transfer
- Long-life product
Directions for use
Cut cartridge open, screw on the nozzle and cut it off to the required size. Place the cartridge in the holder (extractor at the back). The black lip on the de-tensioner has two options:
- downwards for a continuous pressure, recommended when working with hard products such as X-Tack.
- upwards for slight withdrawal to limit the running of softer products such as X-Seal.
Specifications
Suitable for: sealant tubes like Tec7 adhesive sealant, Tec7 X-tack, Tec7 Trans, Tec7 XealPro, Tec7 Tecryl, Tec7 Anchor and for all other common sealant tubes.
Pump ratio: 18:1 (for high thixotropy and accuracy).
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.