Tec7 X-Tack
At a glance
- Extreme initial adhesion
- Waterproof and airtight
- Perfect for vertical applications
Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops
Product description
Tec7 X-Tack is the strongest MS polymer on the market. This neutral adhesive sealant is a permanently elastic 1-component formulation based on MS polymer that has been developed for extremely high initial adhesion. X-Tack is vibration-resistant and impact-resistant and can be used on both dry and wet surfaces.
Benefits of Tec7 X-Tack
- Strongest MS polymer on the market.
- Extremely high initial adhesion.
- Vibration- and impact-resistant.
- Also suitable for damp substrates.
- Perfect for vertical applications.
Specifications
Contents: 290 ml
Colour: white, grey, black
Skin formation: 7-15 minutes
Curing: 24 hours: 2.7 mm, 48 hours: 4 mm
Elongation at break: > 400%
Weather resistance: very good
Shelf life: 15 months in closed, original packaging
Viscosity: stiff paste
Chemical resistance:
- Good: water, seawater, aliphatic solvents, oils, greases, diluted organic acids and lyes
- Moderate: esters, ketones and aromatics
- Poor: concentrated acids and chlorinated solvents
Application gun: caulking gun for 290-310 ml cartridges
Product properties
The key technical properties clearly listed in one place.
- Article number
- LIJ000737
-
Adhesive type describes the family of adhesive or sealant, such as epoxy adhesive, (methyl)methacrylate adhesive, polyurethane adhesive or polymer sealant. Its chemistry affects processing, curing, flexibility and adhesion. Products of the same type may still differ, so check the suitable substrates and application instructions.
- Polymeerkit
-
The period for which an unopened product remains usable under the specified storage conditions. Check whether the period starts from the manufacturing date or another date. Shelf life may be shorter after opening, especially for products sensitive to air or moisture.
- 15 months
-
The time after application during which a skin forms on the surface of a sealant. Tool the joint before the skin develops, as adjusting it afterwards can affect the finish or adhesion. Temperature and humidity influence this time.
- Approximately 7-15 minutes
-
Elongation at break indicates how much a material can stretch during a tensile test before it breaks. It is expressed as a percentage (%) of the original length. At 100% elongation, the material has doubled in length just before breaking. A high value indicates a high ability to deform, but not how much force is needed.
- > 400%
- Net contents
- 290 ml
-
Viscosity measures how easily a liquid flows, or how thick it is. Dynamic viscosity is usually expressed in mPa·s (millipascal-seconds), sometimes in cP (centipoise); 1 mPa·s = 1 cP. A lower value usually means a more free-flowing liquid, while a higher value indicates a thicker product. Temperature and test method strongly affect the value. Note that mPa·s is different from MPa, which is used to express mechanical strength.
- hard paste
Reviews
Frequently bought together
Useful additions for your project.