Tec7 Ten-Way nozzle (2 pieces)
- For full-surface application
- 10 cm working width
- Uniform adhesive distribution
The Tec7 Ten-Way nozzle is a special applicator designed for (semi-) full-surface application. With a working width of 10 cm and ten adhesive beads measuring 3–4 mm in height, this nozzle ensures even adhesive distribution without build-up. This results in low consumption and a large contact area, while reducing moisture penetration to the substrate.
Features of the Ten-Way nozzle
- Low consumption.
- Fast application.
- High contact surface.
Applications
Suitable for:
- Brick slip bonding.
- Full surface bonding with high initial tack.
Directions for use
- Mount the Ten-Way nozzle on the cartridge or sausage adapter.
- Position the nozzle on the 45° sliding surface.
- Apply the adhesive using a pulling motion.
Clean the Ten-Way nozzle after use with Tec7 Cleaner.
Specifications
Packaging: box of 2
Colour: white
Working width: 10 cm
Number of adhesive grooves: 10
Bead height: 3-4 mm
Article number: 599432290
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
