Tec7 Cleaner

Have you used a Tec7 product to fill joints or seams, for example? With Tec7 Cleaner you achieve the ideal finish. This product removes non-cured Tec7 products, can be used safely on virtually all surfaces and does not leave a greasy film. 

Benefits of Tec7 Cleaner

• Finishing of joints and seams. 
• Cleaning tools.
• Removes non-cured Tec7 adhesives and sealants.

Directions for use

Spray Tec7 Cleaner and leave for a few moments to take effect. Rub off the contaminant with a clean microfiber cloth. Repeat if necessary. Allow Tec7 Cleaner to evaporate fully before gluing. Test on an inconspicuous area for colourfastness. Tec7 Cleaner dissolves fresh sealant. For sealant finishing, apply on spatula in small doses to prevent staining. Tec7 Cleaner does not cause an oxide layer on light metals and can therefore be used safely on various substrates. Use Tec7 HP Clean as a solvent-free tooling agent on natural stone. Use Tec7 Multiclean to remove natural contamination.

Applications 

Tec7 Cleaner can be used for various purposes:

• Finishing of joints. 
• Degreasing and cleaning of all surfaces before using adhesive and sealant products.
• Removing adhesive residues from stickers or labels.
• Removing residues of contact adhesives.
• Degreasing and cleaning tools and workshop equipment, both hand tools and machines.
• Fast and safe degreasing of ferrous and non-ferrous metals before bonding or painting.

Specifications

Contents: 500 ml
Colour: colourless
Odour: slight solvent odour
Condition at room temperature: liquid
Boiling point: 138°C - 175°C.
Vapour pressure: 1.0 kPa at 20°C.
Specific gravity: 0.72 at 25°C.
Flash point: 27°C.
Spontaneous ignition: 208°C.
Shelf life: 36 months, in closed original packaging, dry, cool and frost-free