Rayston AquaPur Concrete Injection Resin
At a glance
- Semi-rigid PU injection resin
- Water-activated
- For concrete injection
AquaPur is a professional hydroactive polyurethane injection resin designed to stop water leaks in concrete effectively. It reacts quickly with water to form a semi-rigid foam with excellent mechanical properties, reliably sealing cracks, joints and voids. AquaPur is suitable for applications requiring permanent waterproofing, including structures exposed to continuously wet conditions.
Rayston AquaPur is supplied as a two-component system (resin + accelerator) and can be applied using single-component PU injection equipment.
AquaPur Flex is flexible and ideal for moving cracks, whereas AquaPur is semi-rigid and suitable for permanent water exposure in larger concrete structures.
Applications of AquaPur concrete injection resin
- Waterproofing in canals, waterways and reservoirs.
- Injection of cracks in concrete.
- Sealing expansion joints and construction joints.
- Waterproofing underground structures, such as tunnels and metro systems.
- Waterproofing boreholes, shafts and galleries.
- Reliable water stopping during excavation and foundation work.
AquaPur is suitable for basements, tunnels, car parks, water reservoirs and other concrete structures in permanent contact with water.
Main features
- Reacts with water and expands into foam (hydroactive injection resin).
- Semi-rigid foam with good mechanical properties.
- Long-lasting watertight seal, even during prolonged water exposure.
- Suitable for cracks and joints completely filled with water.
- CE-certified according to EN 1504-5 (injection products for crack sealing).
- Durable and reliable for professional concrete repairs.
Instructions for use
- Cracks and joints must be free of dust and loose particles.
- Sufficient water must be present in the crack for the foaming reaction to occur correctly.
- Inject using suitable PU injection equipment.
- Position injection ports every 20–30 cm.
- Always inject vertical cracks from the bottom upwards.
- Clean equipment immediately after use with machine oil or a suitable solvent.
Specifications
Mixing ratio: 100:4 (by weight and by volume)
Product: semi-rigid PU foam
Colour: bright yellow
Density (free-foamed): ± 26 kg/m3
Hardness: 18 Shore A
Pot life: approx. 45 minutes (at 20°C)
Expansion factor: approx. 1:40 (free expansion)
Foaming time at 20°C (30 g, 5% water):
- Start of foaming: ± 12 seconds.
- End of foaming: ± 60 seconds.
Water absorption: high at low density (typical of hydroactive foams)
Application temperature of substrate: +5°C to +40°C
Shelf life: 12 months from the production date. Store between 10°C and 30°C.
Packaging
Rayston AquaPur injection resin is available as a complete 26 kg set (25 kg of component A + 1 kg of component B), ideal for smaller injection jobs. For larger concrete injection projects, AquaPur Flex is also available in 200 kg drums (component A) and 20 kg cans (component B). These are sold separately and are not supplied as a set.
Do you have questions about the right package size or quantity? Please contact our specialists for personal advice.
Product properties
The key technical properties clearly listed in one place.
- Article number
- POL002298
-
Hardness describes a material's resistance to indentation. For silicone rubber and other elastomers, the Shore A scale is commonly used: Shore A 15, for example, is softer than Shore A 40. Harder plastics may be rated on the Shore D scale. The number belongs to its Shore scale and is not a unit like MPa; values on different scales cannot be directly compared.
- Shore A 18
-
The period for which an unopened product remains usable under the specified storage conditions. Check whether the period starts from the manufacturing date or another date. Shelf life may be shorter after opening, especially for products sensitive to air or moisture.
- 12 months
-
Mixing ratio indicates how much of each component is needed, for example resin (A) and hardener (B). A ratio of 100:50 by weight means 100 grams of A to 50 grams of B; by volume you might use millilitres. Weight and volume ratios are not necessarily the same because the components may have different densities. Accurate measuring is important for proper curing.
- 100:4 (by weight and volume)
-
Working time is the period during which a product remains workable after mixing or activation, usually given in minutes at a specified temperature, often 20 °C. With reactive resins, the chemical reaction also continues in the mixing container, and larger quantities or higher temperatures can shorten this time. Working time is different from gel time and full curing time.
- Approximately 45 minutes (at 20 °C)
Safety information
Read the warnings and use appropriate protective equipment before handling the product.